2008 fuzion 362 frame question

[maxx1963]

I just got a 2008 fuzion 362 and it came with very few manuals. Does any one know how to check what chassis/frame you have? Any thing about the slides I need to know?

Thanks!!

[LouSlugger]

I have an 07. No trouble with the slides yet. The motor for the master bedroom slide is located under the bed (lift up the wooden base for access). In the event of motor failure, you can mechanically move the slide with a ratchet (3/4 inch I think but not sure). Tech told me you should disconnect the wires to the motor before doing this to avoid motor resistance. You can do the same for the other slide but access to that is from underneath, and you will need to cut a hole in the underbelly to get to it. Don't know why they didn't put an access panel there for that purpose. Good luck.