View Full Version : Dometic Zingle Zone Thermostat issue - E2
lspajm
07-17-2012, 02:43 PM
I have a 2011 keystone passport 3220BH - it has a single zone dometic thermostat and on the screen it keeps blinking between the set temperature of the AC (when i have the AC selected) and "E2". in the book that I have it does not mention an E2 error code anywhere.
any help would be appreciated!
Thanks,
Andy
hankpage
07-17-2012, 04:06 PM
According to the manual available on-line:
E2 Open circuit or out of range Indoor Temperature Sensor. Heating and cooling
operation will be locked out. Fan operation can continue to operate.
It should be on page 11 of your manual under Error codes.
Hope this helps, Hank
lspajm
07-17-2012, 05:06 PM
thanks for your reply -- how do I find that manual online? All i have is a 1/2 sheet of paper that gives me very limited instructions. Can you send me a link to where the online manual us located? thanks
hankpage
07-17-2012, 06:15 PM
thanks for your reply -- how do I find that manual online? All i have is a 1/2 sheet of paper that gives me very limited instructions. Can you send me a link to where the online manual us located? thanks
This should be a PDF file of the manual (http://www.primetimerv.com/download/ComponentManuals/Thermostat-SingleZoneDigital-Dometic-OperatingInstructions.pdf) I hope it helps, Hank
vBulletin® v3.8.9, Copyright ©2000-2024, vBulletin Solutions, Inc.