Back up wire

[KWONDR]

Hello to all. I recently purchase a new 2010 Courage 29SAB 5th wheel. I previously owned a Jayco. What I am looking for is info on wiring for this new unit. As with other units I found it not to have back up light on it. I would like to add new tail light or lamps for back up light. Questioning where the reverse light circuit end in this unit & where wiring is run though out it. I will also be replacing the standard light with LED (intertior & exterior). Looking for any help. I contacted my dealer who told me to contact Keystone. I contacted Keystone & they gave me an Email address of [email protected]. This address return as not recieve.

[Festus2]

Welcome to the forum. One would think that your dealer, if there is a service/repair center on site at the dealership, would have a wiring diagram of your RV and would share it with you.

[Jim W]

I would try this site http://www.keystonerv.com/ .Then hit the customer service tab or contact them. I believe you will then need to call them or write to them in a letter asking for this information.
Jim

[Flyguy]

Hi, I installed backup lights on my Passport a while back, pictures for it can be found at: http://eaa1358.com/Passport/Backup_Lights/ these were replacements for the original Bargman 92 type without backup lights that came on my Passport. The wire for the backup lights was found in the junction box under the front of the trailer, it's the yellow wire and it was cutoff in that junction box so I had to splice into it and run a wire in wire loom back to the tail lights (I kept the color yellow), the pictures are high resolution so it will take some time to download.