Laredo recessed lights

[pbryan]

We will be taking our 2012 291TG dry camping for a week this summer and I am looking into changing out the bulbs in the recessed lights for LEDs. Only problem is I cannot figure out how to get to the bulbs! Anybody know how to get them open? I can barely twist the frosted glass lens on a few fixtures, but it doesn't seem to be doing anything...

Thanks,
Paul

[mikell]

The round glass frosted ones about 5" in diameter. Righty tighty lefty loosey. And they fall out going down the road alot till you figure them out

[pbryan]

I guess I need to try harder... I got a full rotation to the left on one but it didn't get any easier to turn, so I assumed it wasn't threaded on...

[mikell]

Quarter turn maybe if thats the lights

[Fireman640]

I pulled the whole unit out then twisted the lens off the unit snapped right back in the hole so i figured that way would work too?

[pbryan]

How is the whole unit held in? Do you just pull down on it? I assume you have to pull pretty hard?

[Fireman640]

How is the whole unit held in? Do you just pull down on it? I assume you have to pull pretty hard?

on mine yes i had to pull pretty hard mine was held in with like clips that expand and retract when push or pull on but yes the glass does come off too but i just kept spining the whole fixture so i pulled and it all came out just remember do not touch them bulbs with bare fingers if you do you will be buying a new bulb.