Misaligned Slideout

[Sam]

I have a 2002 Keystone Hornet 29G.
When the slider starts out the rear starts out first, then the front will start to move,when its out all the way, the rear is snug with the wall, but the front lacks about 2" being snug. Bring it in and the outside both back and front, are snug with the outside wall. I have tried adjusting the drive shaft that runs from back to front but this only left the front sticking out 2" when it would be closed. Not good if you are towing in the rain..
Any help with this would be greately app.
Sam
2002 Keystone 29G
1999 f350 7.3

[Ron]

I don't know if on the 2002 models if they used the Lippert System or not. If so just type Lippert Compenents and go to the Support section under Slide Outs and it will guide you through the realignement /timing process. Hope this helps. Happy Campin...............Ron

[Sam]

Thanks Ron : Found the site and downloaded the info, this is the system I have... Will let you know later how it worked... Thanks
Sam
1999 f350
2002 Keystone Hornet

[Sam]

Ron: I put the Hornet in the shop... It needs some new seals anyway...Thanks :Sam

[Ron]

Sam: glad you found the Lippert site, kinda handy to have Lipperts available when needed, you never know what may happen on the road. Take care and Happy Campin...............Ron