View Full Version : Cougar 21RBS slide-Out width

06-24-2020, 04:27 AM

I need the slide-out width for a 2015 Cougar 21RBS to order a reclining loveseat that will fit. I am removing the existing dining section.

Our camper is currently in storage, and I don't want to have it pulled it out to just measure the slide-out width. I want to have one delivered before I have it pulled out for a trip in July.


06-24-2020, 09:03 AM

I have the same model as you except mine is an 2013 year model. I just went out and measured it and here is what I found:

The inside dimension width of the slide out is 76 1/2 inches side wall to side wall.

The depth is 39 1/2 inches measured on the side wall,... from back wall to front of side wall.

I have the U shaped dinette and the side benches stick out a little past the side wall. They are 43 1/2 inches from back wall to edge of bench.

Hope this makes sense.


06-24-2020, 09:41 AM
Thanks, Lee! The loveseat recliner I'm considering is 76" and includes the armrest cushioning. This will leave a 4' gap below the armrest cushioning. So, I should be good to go!

Tom J.

06-25-2020, 07:10 AM
Check to see if the axle wheel wells under the dinette will be a problem.