PDA

View Full Version : Converter problems


rube191
04-29-2020, 08:58 AM
Hello I have a 2017 Montana with a Progressive PD4500 power control center Converter ? It has all 15 amp fuses . Currently my kitchen side electric plugs do not work ie outlets and refrigerator. The fuse for them is the only one on the panel that is black. Is it some sort of fuseable link ?????????? Thanks

flybouy
04-29-2020, 09:09 AM
The fuses are for 12vdc circuits. The 120vac side uses circuit breakers. If a breaker has tripped turn it all the way off, then back on. The outlets could be connected to a GFIC outlet. That may have tripped. You must have shore power connected in order to reset the GFIC.

travelin texans
04-29-2020, 09:22 AM
Reset the GFCI near the bath/kitchen sink.
As mentioned you have 2 power systems, 12 volt from batteries for lights, water pump, control boards on fridge & water heater, slides, etc all protected by fuses. Also 120 volt from shore power through the 30 or 50 amp umbilical cable for all plugs, fridge, water heater, microwave, converter to charge the batteries, air conditioners, etc all protected by circuit breakers.