PDA

View Full Version : Sink replacement upgrade


roadglide
04-01-2020, 05:57 AM
I have a cracked sink and have searched everywhere all I have see is the same light weight thin sink . I found that lipped has the model I need but the reviews sound like the the same sink I’m replacing. Home Depot carries the stainless sink out of stock now. Im not Into cutting and redoing the plumbing for an upgrade on a sink. Is there up grades for this sink?

travelin texans
04-01-2020, 07:58 AM
I would think there could be all sorts of upgrades, but anything other than the OEM could/would require counter top or plumbing modifications which you "are not into". So the original type sounds like your only option.

Hblick48
04-01-2020, 08:41 AM
Our plastic sink cracked in two spots, needed to be replaced. Size 17 x 29. I checked everywhere including Trekwood, etc. Even found original mfg and model number. I found it online but everyone was out of stock..

I posted the issue on the Montana forum and was advised that standard 33 x 22 sink would just fit after some cutting and fitting. They were right, took a bit of work, but looks great!

flybouy
04-01-2020, 09:30 AM
If I were looking at replacing the sink I would take many measurements then do some research on line to see what fits. Any plumbing supplier or home improvement store should be able to offer you help.

rhagfo
04-01-2020, 10:08 AM
Well we replaced our plastic twin bowl sink with a drop in SS unit. Made by Moen I can’t locate it on their wed site it has been over three years dice the mods. The rim is 29”x 19.5” the big bowl is 7” deep and single hole faucet. Yes, it did require some trimming to get it in.

Lee
04-01-2020, 10:45 AM
Hi,

Been there dun that!!!

Here is a link to the one I installed:

https://www.amazon.com/gp/product/B00D82R17W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hope this helps,
Lee

rhagfo
04-01-2020, 11:06 AM
Hi,

Been there dun that!!!

Here is a link to the one I installed:

https://www.amazon.com/gp/product/B00D82R17W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hope this helps,
Lee

That is the one!

JRTJH
04-01-2020, 11:12 AM
Hi,

Been there dun that!!!

Here is a link to the one I installed:

https://www.amazon.com/gp/product/B00D82R17W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hope this helps,
Lee

That is the one!

Listed on Amazon at that link as "no longer available"....:(

roadglide
04-01-2020, 01:30 PM
My lady order a Dayton sink from Home Depot double bowl drop in stainless steel. It should fit with out cutting the counter top . Thank you