PDA

View Full Version : Bathroom Electric


heatherday13
03-16-2020, 11:45 AM
Hello all,

Very new to the RV world!

I recently purchased a 2011 Keystone Laredo 303TG. Lights and fan do not work in the bathroom. The GFI plug has been reset and does work. Checked lightbulbs (obvious!) still not working.

Any ideas?

Appreciate any help!

bobbecky
03-16-2020, 11:51 AM
The lights and fan are probably 12 volts and they would be protected by a fuse, not 120 volt breakers or GFI devices. It sounds like you might have a bad fuse.

66joej
03-16-2020, 11:52 AM
Lights and fan are 12 volts. Check for a blown fuse. It would be one of the ATO (blade type).

Canonman
03-16-2020, 11:55 AM
Lights and fan will not be on the GFI circuit. You have a fuse panel located by your 12vdc converter. Ours is in the main living area. Look for a blown fuse, not a breaker.

Obviously I type too slow:)

flybouy
03-16-2020, 12:34 PM
Hello all,

Very new to the RV world!

I recently purchased a 2011 Keystone Laredo 303TG. Lights and fan do not work in the bathroom. The GFI plug has been reset and does work. Checked lightbulbs (obvious!) still not working.

Any ideas?

Appreciate any help!

I have the same camper. The switch inside the bathroom beside the inside door beside the commode must be on AND the switch on the light itself must be on. The fan switch is a pushbutton switch on the fan itself. Let me know if that helps.

heatherday13
03-16-2020, 12:46 PM
Thank you guys! I appreciate you :) - heading to the lake now since the whole state has shut down basically so I will see what happens with a new fuse! :)

heatherday13
03-16-2020, 12:47 PM
Flyboy - You may wish you didn't tell me we had the same camper - I have a ton more questions lol :) Thank you!!

flybouy
03-16-2020, 01:55 PM
Flyboy - You may wish you didn't tell me we had the same camper - I have a ton more questions lol :) Thank you!!

Bring them on!

chuckster57
03-16-2020, 02:18 PM
Flyboy - You may wish you didn't tell me we had the same camper - I have a ton more questions lol :) Thank you!!



Be advised- he has back up!! :)

flybouy
03-16-2020, 02:20 PM
Be advised- he has back up!! :)

I think I'm the second stringer. :lol:

wiredgeorge
03-16-2020, 04:43 PM
We call this bunch "the Squad"!

flybouy
03-16-2020, 04:59 PM
We call this bunch "the Squad"!

Just don't call us the "Mod Squad"! LOL.. I sold my metallic gold conversion van in 1982 I think. :lol:

heatherday13
03-17-2020, 11:31 AM
Thank you guys I appreciate you!!

Next question...

We have Dish playmaker if we hook it up directly from the satellite to the box it works if we hook up to the outside satellite ports - nothing.

What am I missing? :|

chuckster57
03-17-2020, 11:40 AM
Does your unit have KeyTV?

heatherday13
03-17-2020, 11:47 AM
Does your unit have KeyTV?


Umm sorry not sure what that is but I do know I have a Jensen TV if that helps?

chuckster57
03-17-2020, 11:54 AM
Where you hook up the coax from the dish to the trailer, is it just a port or is there a “box” with a blue light?

heatherday13
03-17-2020, 12:02 PM
Where you hook up the coax from the dish to the trailer, is it just a port or is there a “box” with a blue light?

It's just the port

flybouy
03-17-2020, 12:18 PM
Thank you guys I appreciate you!!

Next question...

We have Dish playmaker if we hook it up directly from the satellite to the box it works if we hook up to the outside satellite ports - nothing.

What am I missing? :|

Sat cable to the cable connector in the back wall outside. Mine is on the driver's side with a white rubber cap over it.

If It it's the original antenna amplifier there will be a "cigarette lighter" style plug with a black button and an led light between it and the coax connection. That button must be pressed in so the light is out. This wall plate is located under the bunk where the back television would set.

I don't have satellite but if I remember correctly you have disconnect the coax "loop" on the wall plate and switch the cable or leave it off, not sure witch. Hope this helps.