TV Bracket for 2012 Rapter

[11155]

Does anyone know who makes/manufactures the TV mounting brackets for the 2012 Rapters? I am assuming the 2011 brackets are the same too.

Thanks.

[Me.Bikes.Dogs]

I think they are custom made by Keystone. I recently installed a new flatscreen in my 300MP and had to drill new holes in the attachment plate but it works like a charm.

[hoser43]

Ramco engineering makes them. They are not cheap !! Try monoprice.com

[skdooman2004]

just bought the wall part, bedroom did not have a mount, now we can use garage tv in bedroom, wall mount was about 18 dollars at dealer, but had to order from keystone, took about a week

[hoser43]

My 2012 Raptor came with the wall mounts in bedroom and garage, but to bring in another T.V. keystone wanted over $150 each for the swivel brackets that attach to the back of T.V. After reserch found Ramco Engineering supplies the mounts/swivel bracket to Keystone. They wanted $93 for the units. They would not sell the swivel arm seperatly. So we moved the T.V. from living area into bedroom, used T.V with table top stand in it's place. Small bungee cord that came with camper holds it in place nicely for traveling. Bought swivel/wall mount from Monoprice.com that holds 44 lbs. for garage for $22 with shipping. Hung 36 " on it. Hope this helps.

[11155]

I have the extra wall mounts mounted in both the bedroom and storage area but need the swivel part. Looked on mononview but not sure which one is in my camper. Anyone know the product for the ones mounted in the 300MP's?

[Beachnut]

I have a 2010 Outback 230RS and just bought an outside TV wall bracket from Keystone that I mounted in my home bedroom, on the wall, so i can use the trailer TV at home. I first contacted Ramco, ordered the bracket, and it arrived being the wrong one, and not matching the TV atachment arm that bolts onto the back of the TV. Ramco was very nice, gave me a refund after I shipped the bracket back, and they told me the bracket I have had been discountinued, and only Keystone might have the correct bracket. I called keystone, as the local dealer could not find my specific bracket, either. Keystone parts did some research, and came up with the correct now discontinued wall bracket.

So be careful that the bracket you get, will work, as they do change TV mouting brackets from year to year, model to model... I took a cell phone picture of what I wanted, and emailed it to Keystone, which they used to match exactly what I wanted and needed, at a "fair" price!

Beachnut

[SmittysRV]

Im in the same boat. Our 2011 Raptor 4014 has he wall mounts everywhere, bedroom, garage and outside storage. It only came with the main TV in Galley and one in the garage with the cantilever mount. I am looking for an additional Cantilever tv mount so I can utilize the existing wall mount in the bedroom.

[SmittysRV]

So nobody knows where to get these tv mounts?

[SmittysRV]

I'm going to the dealer tidy and will look into those mounts

[SmittysRV]

The dealer was no help. I will try calling Keystone next. Has anyone done this yet?

Anyone have a factory TV mount they dont need or know where to get one? I just need the half that goes on the back of the TV.

Anyone know where I can get another one of these mounts??

[SmittysRV]

I still have not been able to locate the half that goes on the back of the TV:banghead: Anyone know where these can be found? The dealer here was no help.

[ctpd814]

I'm not sure what style mount you have. I contacted my dealer who contacted Keystone to get one. My dealer advised that was the only way to get one for the style I have. If you contact Keystone, they will refer you to your local dealer. If your dealer won't help, I would try a different dealer.

[ctpd814]

This is the mount I have4195

4196

I hope this helps.

[Essness]

This is the mount I have4195

4196

I hope this helps.

These are made by P.A.W International out of Ft. Wayne, IN. Look them up on eBay.

[SmittysRV]

Ill get a pic of mine later when i get home, mine looks different that that one. Thx for info....(tx)

[ctpd814]

These are made by P.A.W International out of Ft. Wayne, IN. Look them up on eBay.

These are similar to the one that Keystone uses but not the same. The ones on my unit are all steel not polymer.

[ctpd814]

SmittysRV,

I had to take several pictures and e-mail them to my dealer. It took about a month but they were able to get it from Keystone.

[dogger]

What I ended up doing rather than go back and forth with the dealer, then get charged an exuberant amount for a bracket. I ended up purchasing mount off monoprice, then trimmed the piece to the correct angle using one of the TV mounts we have on another tv and voila!

I think this is the one I used! http://www.monoprice.com/products/product.asp?c_id=109&cp_id=10828&cs_id=1082802&p_id=6429&seq=1&format=2

[rdrunr]

I can part with the silver one of anyone needs it but I am looking to buy one of the black ones that I have pictured if anyone knows where I can get one?

[SmittysRV]

I can part with the silver one of anyone needs it but I am looking to buy one of the black ones that I have pictured if anyone knows where I can get one?

I need what goes into that black one, the other end that mounts to the TV. Where can I get that part?

[SmittysRV]

I can part with the silver one of anyone needs it but I am looking to buy one of the black ones that I have pictured if anyone knows where I can get one?

If you find out where to get the other half of that black please let me know. I have what you have pictured there in our front sleeper and in one of the outside cubbies. I want to put a TV in the front sleeper and need the other half, Thx (tx)

[SmittysRV]

If you find out where to get the other half of that black please let me know. I have what you have pictured there in our front sleeper and in one of the outside cubbies. I want to put a TV in the front sleeper and need the other half, Thx (tx)

No one knows eh:eek:

[mdb25]

I called my dealer and they were able to order one from Keystone and have it drop shipped to me. Attached is an image of what they ordered for me. Exactly what I needed.

4717

[SmittysRV]

I called my dealer and they were able to order one from Keystone and have it drop shipped to me. Attached is an image of what they ordered for me. Exactly what I needed.

4717

Thats for the Big flat screen in the Main kitchen/living area right? I am looking for the smaller ones in the front bedroom and the back garage ares. here are a few pictures of what I need.

This is the mount on the wall in my front bedroom, I need the other end that goes on the TV..
http://www.keystoneforums.com/attachments/photobucket/img_107652_0_9b6419774ee1559f4fe4fe877151c920.jpg (http://s153.photobucket.com/user/smittys62/media/Raptor%204014/40303C8C-AEB1-49B0-A0E1-4F35763EA498_zps067nxcoz.jpg.html)

This is what I need, this is on the TV in the garage. I don't like having to move the TV from back to front and visa versa. I have another TV for the front bedroom but can't seem to find the compatable mount.
http://www.keystoneforums.com/attachments/photobucket/img_107652_1_b9d351f9a44c4e8419292a49e53fd00c.jpg (http://s153.photobucket.com/user/smittys62/media/Raptor%204014/1F672D57-09BC-4F3A-B37F-F1EAB9BEAC7E_zpsqmxuf45n.jpg.html)

[mdb25]

Ours must be different, this is the mount for the tv in the garage for mine (Fuzion 342). It allows me to do what you are wanting to do, I can leave the garage tv alone and still put one outside.

[Firemenfred]

I called my dealer and they were able to order one from Keystone and have it drop shipped to me. Attached is an image of what they ordered for me. Exactly what I needed.

4717

thats what i need. i have a mount in the basement of my 300mp. do i have to get it from Keystone or can i get it else ware? i have not looked but does the garage or main tv use the same mount?

[mdb25]

thats what i need. i have a mount in the basement of my 300mp. do i have to get it from Keystone or can i get it else ware? i have not looked but does the garage or main tv use the same mount?

I had to order it from the dealer. I tried working with keystone directly and they said they only work with dealers on parts.

My main tv and garage tv are different brackets. The main tv bracket is much more beefier.

[rnkburg]

I have the 2012 raptor 300mp and the garage tv unhooks and goes under and fits that bracket as well. But here is the kicker you can hook it up but you have to move things around on the brackets to make it swivel so you can see it outside of the storage compartment. I am going to have to move my bracket below in order to make it work like it should


Sent from my iPhone using Tapatalk

[rnkburg]

Oh and on the bedroom we have the third tv there. While traveling down the road that bracket will start to come loose we had to make a special board to cover it up and have it screwed into the studs in order to make it a solid mount. Just beware if you leave the tv upstairs while towing


Sent from my iPhone using Tapatalk

[ri_truck_guy]

Here you go...

http://www.ebay.com/itm/Single-TV-Mount-Universal-TV-Bracket-for-all-Campers-and-RVs-BLACK-/161311393424?pt=Motors_RV_Trailer_Camper_Parts_Acc essories&hash=item258ee88690&vxp=mtr

http://www.ebay.com/itm/Single-Wall-Mount-Universal-TV-Bracket-for-all-Campers-and-RVs-BLACK/370824823729?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D27538%26meid%3D61ab76f406964ae583929ce6a91b ee55%26pid%3D100005%26prg%3D11353%26rk%3D1%26rkt%3 D6%26sd%3D161311393424&rt=nc

[SmittysRV]

Here you go...

http://www.ebay.com/itm/Single-TV-Mount-Universal-TV-Bracket-for-all-Campers-and-RVs-BLACK-/161311393424?pt=Motors_RV_Trailer_Camper_Parts_Acc essories&hash=item258ee88690&vxp=mtr

http://www.ebay.com/itm/Single-Wall-Mount-Universal-TV-Bracket-for-all-Campers-and-RVs-BLACK/370824823729?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D27538%26meid%3D61ab76f406964ae583929ce6a91b ee55%26pid%3D100005%26prg%3D11353%26rk%3D1%26rkt%3 D6%26sd%3D161311393424&rt=nc

That would work but I would like the cantilever part as well...Thx for your help.

[notanlines]

Smitty, check the other thread. A good answer is there for you.....http://www.trekwood.com/products/154459/Bracket-TV-2-Arm-Swing-w-Nylon-Quick-Disconnect-Black

[SmittysRV]

Smitty, check the other thread. A good answer is there for you.....http://www.trekwood.com/products/154459/Bracket-TV-2-Arm-Swing-w-Nylon-Quick-Disconnect-Black

That's it!! Wow that's spendy!!!! Thx!!