PDA

View Full Version : Antenna Replacement?

OldKingKibitzer
08-28-2019, 01:42 PM
Sooooo my stock antenna went missing. I'm not sure what happened, it was here one day, gone the next after a 500 mile trek across Kansas at 70+ MPH. I'm thinking it came off in the wind or something :angel:

I need a little help replacing this one- It was the stock non-extending T shaped antenna. Black plastic with metal ends. What exactly did this antenna do? If it was just for HD TV- Can I replace it with the Winegard Air 360 Omnidirectional HDTV antenna? Or does it need to be a stock replacement from Keystone? Yes, this was an amplified one that gets turned on in the bedroom...The switch is next to a male coax.

Help please :)
K_N_L
08-28-2019, 05:17 PM
Not sure about 2013 but on mine the factory unit was from these guys. It is a combined TV and radio antenna.

https://continu.us/


Not sure about sales but they were helpful when my booster blew up. And -- the 1st time I checked my antenna on the roof, the thru bolt that was supposed to hold the antenna to the base was barely finger tight and both washers where on the head side of the bolt, nothing on the nut side... so luckly my hadnt flown off.
Ddubya
08-29-2019, 03:31 AM
Most likely it was a King Jack

https://kingconnect.com/product/king-jack-antenna/
OldKingKibitzer
08-29-2019, 09:05 AM
Most likely it was a King Jack

https://kingconnect.com/product/king-jack-antenna/

It was not actually....The outer arms were metal. After much searching I believe it was a PATRICK INDUSTRIES 102262 Ca1500 RV Antenna with FM Radio, Black.


Biggest question I have- Am I able to use a different HDTV/AM FM Antenna?
wobly
08-29-2019, 09:32 AM
Can't see why you couldn't use a different antenna. The power supply might be the only thing left to change out.
BTW, how are the cable end connectors after the old antenna was forcibly removed?
lonewolftx
09-12-2019, 07:35 AM
Not sure about 2013 but on mine the factory unit was from these guys. It is a combined TV and radio antenna.

https://continu.us/


Not sure about sales but they were helpful when my booster blew up. And -- the 1st time I checked my antenna on the roof, the thru bolt that was supposed to hold the antenna to the base was barely finger tight and both washers where on the head side of the bolt, nothing on the nut side... so luckly my hadnt flown off.

My 2016 Fuzion had this antenna as well. Same booster switch shown as well. I’ve replace the booster 2x now. Antenna still works fine. Oh happy day!;)