PDA

View Full Version : Circuit breakers


Wingnut73
05-14-2019, 11:35 AM
I hav a 2006 rp3712. I have a question about the 3 circuit breakers that are located in the battery compartment. They are the automotive type of breakers I wanted or replace 1 because it came apart. But it has no markings on it to show how many amps it is. Would anyone have any information about them? Any help would be great. Thank you

chuckster57
05-14-2019, 12:08 PM
Can you figure out what is powered through that breaker? The rating isn’t “stamped” in the case?

Wingnut73
05-14-2019, 02:43 PM
1 wire looks like it go to the pigtail maybe the charge wire it’s 12 gage the other is 10 gage I don’t know where it goes. I pulled all 3 breakers out I found 1 is 30amps. The hot wire connecting the 3 together is 10 gage.

TonyM13
05-18-2019, 05:34 PM
Thanks for the input on how to realign the slide everybody, we figured it out. We actually had some rot going in the floor as the owner before us had allowed water to continuously get in there. We tried something we have never seen before. We had to replace the floor but it wasn't in the budget, anyways we cut out the rotten part and cut an exact replacement and urethaned it. We then put the replacement where the old rotten one was. we then added a precisely cut 1/2" board over the replacement piece and the original floor in the slide to help hole the two pieces together. It ended up being the rot screwing up the alignment because the new floor on the end now goes in all the way with the slide.

Wingnut73
05-19-2019, 08:25 PM
I found out that all 3 circuit breakers are 30amps. Thank you