PDA

View Full Version : Levelers?


Controller23
04-09-2019, 07:05 AM
What do you use to level your trailer? I’ve got a passport 239ML and I’m new to all this. There’s about a thousand products out there to level your trailer, then of course there’s the option of using wood blocks.. suggestions please.

slow
04-09-2019, 07:11 AM
What do you use to level your trailer? I’ve got a passport 239ML and I’m new to all this. There’s about a thousand products out there to level your trailer, then of course there’s the option of using wood blocks.. suggestions please.

LevelMatePro and Anderson levelers are my choice.

https://logicbluetech.com/
https://andersenhitches.com/Products/3604--camper-leveler.aspx

Here is my review and opinions of others: http://www.keystoneforums.com/forums/showthread.php?t=25609&highlight=levelmatepro

Note that the battery issue I described has been resolved with recent programming and hardware changes.

Tbos
04-09-2019, 09:08 AM
I used to just drive it up on blocks. Always considered getting the Anderson levelers.

ctbruce
04-09-2019, 09:17 AM
LevelMatePro and Anderson levelers are my choice.



https://logicbluetech.com/

https://andersenhitches.com/Products/3604--camper-leveler.aspx



Here is my review and opinions of others: http://www.keystoneforums.com/forums/showthread.php?t=25609&highlight=levelmatepro



Note that the battery issue I described has been resolved with recent programming and hardware changes.This^^. Works great.

Dave B
04-09-2019, 09:18 AM
https://www.google.com/search?q=andersen+leveler&ie=UTF-8&oe=UTF-8&hl=en-us&client=safari#lbl=OVERVIEW&pie=plaji-i

The Andersen Levelers work extremely well.

UsTwo
04-09-2019, 09:21 AM
I just used 2x6 blocks cut and beveled. those levelers still have to have something underneath if you set up on anything soft.

sourdough
04-09-2019, 10:26 AM
I always used wood blocks, then went to the plastic "Lego" blocks. Now have the Andersen levelers and they are a GREAT improvement over the others. Love the chock on them. Then get the Andersen Rapid Jack and use the chock from the levelers on it as well.

JRTJH
04-09-2019, 11:22 AM
I have a 12" level gauge mounted on the pinbox. While sitting in the driver's seat I can see the gauge. Each mark is 1" at the trailer wheels, so I count the marks, put that many "plastic lego blocks" (each is 1" thick) between and behind the wheels, back onto them, block/chock the wheels, unhook the trailer and level "front to back" with the landing gear. Leveling is done, stabilizing consists of tightening the 6 hand screws on the BAL stabilizer bars and we're ready to plug in power, connect water and sewer hoses. Then it's deploy the awning and break out adult beverages. Total time, typically 10 minutes. Breaking camp takes longer, primarily to drain hoses, clean blocks and get everything back into storage bags/boxes.

roadglide
04-09-2019, 11:47 AM
John nice idea with the acculevel with the Anderson wheel leaving chock I could basically not use the darling GF to help level the rig . There rated for 30K lbs who is going to contest that. I can't find where one crushed unlike the hitch lol.

JRTJH
04-09-2019, 12:14 PM
Here's what it looks like from the driver's seat. I suppose you could call it a "pre-historic EZ Level Gauge" (batteries not required) LOL

slow
04-09-2019, 01:35 PM
An Acculevel works well on a FW, but with a TT and crew cab TV, I could not see the bubble/ball.

roadglide
04-09-2019, 07:36 PM
I'm going to try a smaller level on the generator door up front of the camper and see how well it shows up on the denial back up camera.