PDA

View Full Version : Dometic Thermostat issue


Msdt-99517
09-24-2018, 05:32 PM
We just bought a new Cougar 34 Tsb and the digital Thermostat Sucks! Anyone have issues with the digital thermostat? If so which one did you switch too?

Old Mustanger
09-24-2018, 07:31 PM
Had to reset ours almost immediately after we got the trailer, no problems since then. Sorry I don't remember which buttons to push at the same time to accomplish the reset, check the thermostat's manual for instructions.

DocP
09-25-2018, 01:21 AM
You're correct - the digital thermostat is very quirky, and I periodically see it resetting the temperature to 90 degrees all by itself. It definitely takes some getting used to how much/little pressure to apply to the touch pad. It's on my list to replace in next Spring.

cpaulsen
09-25-2018, 04:12 PM
Just my Dometic thermostat new face plates . Mine did not want to work sometimes. Got ahold of Dometic and they sent me 2 new ones at no cost.

Frisbeekev
09-25-2018, 04:15 PM
I have the dometic one and it goes to 90 by itself. Bought a Honeywell I will be switching to soon. The dometic thermostat stinks in my opinion.

scottthelocksmith
12-09-2018, 08:24 AM
I have a 2019 Bullet, the only way I can make mine work is by taking the cover off and touching the contacts! Going back to the dealer again this week because now we have a clicking sound out of the AC when the furnace is running. The pattern is becoming clear now after our 3rd outing - Camp, take to dealer, put away.

77cruiser
12-09-2018, 04:29 PM
Mine goes back & forth F to C, sometimes I push the button & it does nothing.

Msdt-99517
12-11-2018, 04:43 PM
dometic sent us a new one and it works perfect!

PARAPTOR
12-11-2018, 07:44 PM
Good, glad to hear you got it resolved and got back to us

Thanks

waterman1148
01-01-2019, 06:04 PM
I've found that high humidity inside the camper is usually when mine acts up.

Farside
01-03-2019, 01:47 PM
I have the Domestic ten button two zone model and it has taken me awhile to figure out why the programed scheduled zones don't work the way I program them and schedule the furnace to come on like I want in the morning. Found out if I actually SET THE CLOCK on the controller it actually works great. I have also found that if I lose power to the RV, and my battery isn't connected, the clock will zero out and the clock will need to be reset again once I have power back on the rig. I guess it's just been a learning experience with all these buttons to push.