View Full Version : Hideout sink covers
dannx
09-03-2018, 05:19 PM
Does anyone know where to get the sink covers that match the design scheme of a 2018 hideout... the sink is about 13x23 but can’t find them any where.. thanks in advance
66joej
09-03-2018, 05:46 PM
Does anyone know where to get the sink covers that match the design scheme of a 2018 hideout... the sink is about 13x23 but can’t find them any where.. thanks in advance
I think you can buy teflon sheets on Amazon and cut to fit the sink.
JRTJH
09-03-2018, 07:36 PM
The laminate is called Yosemite Granite and is made by Splendor. Trekwood.com has it in stock for about $225 per sheet but shipping would probably make that price double or triple. They may have sink covers available. Give them a call and see what they suggest.
dannx
09-04-2018, 07:54 PM
Does anyone no of any after market ones that fit these sinks?
Branden_Rodgers
09-05-2018, 10:19 AM
I bought a white cutting board off amazon and cut it down to fit. Then took a 2 inch hole saw and cut a hole to be able to get it out. Works and looks factory.
tjkarch60
09-05-2018, 10:22 AM
I bought a wooden cutting board from IKEA and cut it down to fit. It overs almost half of the sink, so you can still use the faucet.
Eastham
09-05-2018, 02:10 PM
Can you order them from keystone? Our 2016 cougar didn't have them when we bought it.but after some research we learned that they should of been included. Keystone took care of it and shipped them to the dealer free of charge.
Does anyone know where to get the sink covers that match the design scheme of a 2018 hideout... the sink is about 13x23 but can’t find them any where.. thanks in advanceDo you have an undermount sink? We have a 2017 model with a drop in style sink. Just wondering what type of cover you are looking for?
Thomasbeau
09-11-2018, 04:53 AM
I purchased this... Winco CBWT-1824 Cutting Board, 18 by 24 by 1/2-Inch, White from Amazon.
https://smile.amazon.com/gp/product/B001DI5VCA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
It's 1/2" thick and oversized but I was able to cut it very nicely with a good carbide blade on my table saw. I had my wife spray the blade with silicone spray while I cut to reduce the heat and slight melting that occurred without it. With the silicone the cut was perfect. Then I used a deburring tool around the edges and some very fine sandpaper to finish it off. After the cut was done and perfect I used a 1.25" hole saw to cut a finger hole in one side. It's not a perfect match because the board is pure white but it still looks good and works as expected.
I will post some pics tonight if anyone is interested.
wiredgeorge
09-11-2018, 05:09 AM
Not sure how Keystone parts system works but my last 5ver was a Forest River and they only sold genuine parts through a FR dealer. That being said, I ordered a set of sink covers from a dealer and they were not all that expensive. You might try calling a Keystone dealer and asking the parts department.
Thomasbeau
09-12-2018, 07:08 PM
I purchased this... Winco CBWT-1824 Cutting Board, 18 by 24 by 1/2-Inch, White from Amazon.
https://smile.amazon.com/gp/product/B001DI5VCA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
It's 1/2" thick and oversized but I was able to cut it very nicely with a good carbide blade on my table saw. I had my wife spray the blade with silicone spray while I cut to reduce the heat and slight melting that occurred without it. With the silicone the cut was perfect. Then I used a deburring tool around the edges and some very fine sandpaper to finish it off. After the cut was done and perfect I used a 1.25" hole saw to cut a finger hole in one side. It's not a perfect match because the board is pure white but it still looks good and works as expected.
I will post some pics tonight if anyone is interested.
Here are a few pics of the homemade cover.
vBulletin® v3.8.9, Copyright ©2000-2024, vBulletin Solutions, Inc.