PDA

View Full Version : Atwood water heater not working


Kellie Henkel
09-01-2018, 08:59 AM
Hi!

We have a new Springdale trailer. We can’t get our hot water working. The pilot is out. Help!

Javi
09-01-2018, 09:03 AM
DSI.... Direct Spark Ignition


No pilot...

Make sure the propane is on and flip the switch on the wall inside..

wobly
09-01-2018, 09:12 AM
I'm pretty sure that you don't have a pilot light. You have an ignitor where the gas comes out. But, you also appear to have an electric heating element. So, the first step is to ensure that you have water in the tank and purge the air out. Then, turn on the heating elements at the control panel.

You could have valves closed that are stopping the water from flowing properly. You will have to check that they are all open. Usually the handles will have to be in line with the water lines to be open.

Kellie Henkel
09-01-2018, 09:14 AM
All fixed! Thank u. The switch was off

ctbruce
09-01-2018, 08:53 PM
Dont purge the air out of the WH. You need the air gap in the tank to allow for the hot water to expand. I believe George meant purge the air the from lines by opening the taps.