Sewer lines question

[Easton091]

Well i have the cougar 29BHS and there are 2 sewer line hook ups. I was wondering how do i get the hoses to be able to connect to one "T" section so i can have both lines to drain into the sewer? Seems like the ends of the lines will not connect to the final "T" at the sewer (female/male ends). Can the end of the hoses be changed out? Any suggestions would be appreciated.

[Dhuhn]

https://www.amazon.com/Camco-RhinoFLEX-Connection-Protection-39812/dp/B002OUIXU8/ref=sr_1_1?ie=UTF8&qid=1525641001&sr=8-1&keywords=sewer+hose+y+fitting

You can use this connection.

[mcmeadows1]

https://www.amazon.com/Camco-RhinoFLEX-Connection-Protection-39812/dp/B002OUIXU8/ref=sr_1_1?ie=UTF8&qid=1525641001&sr=8-1&keywords=sewer+hose+y+fitting

You can use this connection.



X2

We have this connector and it works well.

[Easton091]

https://www.amazon.com/Camco-RhinoFLEX-Connection-Protection-39812/dp/B002OUIXU8/ref=sr_1_1?ie=UTF8&qid=1525641001&sr=8-1&keywords=sewer+hose+y+fitting

You can use this connection.

I have that but the end of my sewer hose wont connect. Its made to be in the ground. Can you change the end?

[Dhuhn]

Most ends of your sewer hose should disconnect from the elbow that goes in sewer drain they just twist,unless yours is permanently fastened to your hose.

[Dhuhn]

https://www.amazon.com/Camco-39543-Twist-Connect-Fitting/dp/B000BQR8TE/ref=sr_1_3?s=automotive&ie=UTF8&qid=1525652594&sr=1-3&keywords=sewer+hose+y+fitting

If it is permanently mounted you can cut hose and use these on end, or get new hoses.

[t_dogg80]

I have that but the end of my sewer hose wont connect. Its made to be in the ground. Can you change the end?I bought 2 10 ft extensions that go into my y connector. That goes into my 15ft sewer hose. I also have the 2 separate connections.

[Easton091]

I have 2 of these https://www.amazon.com/gp/product/B01HPHR2M4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and this
https://www.amazon.com/gp/product/B002OUIXU8/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
As you can see the one end hooks to the camper and other end wont connect to the "Y" adapter.

[travelin texans]

The Y connector is not designed to hook directly to the campground sewer connection, a 3rd piece of hose is necessary to go from the Y to the sewer. You'll have to have 3 hoses, the Y, & an elbow to connect to the sewer connection. Possibly the rubber donut for the elbow, most all parks/campgrounds require a solid connection to the sewer & if it's not threaded you'll need the donut, your neighbors will also appreciate it.

[Dhuhn]

You have to disconnect the end that goes in the sewer from your hose,it twist off from where the black hose connects to orange part, then black hose will connect to your y

[Easton091]

The Y connector is not designed to hook directly to the campground sewer connection, a 3rd piece of hose is necessary to go from the Y to the sewer. You'll have to have 3 hoses, the Y, & an elbow to connect to the sewer connection. Possibly the rubber donut for the elbow, most all parks/campgrounds require a solid connection to the sewer & if it's not threaded you'll need the donut, your neighbors will also appreciate it.
HA! Yes i have the last piece also that goes into the ground after the "Y".

[Easton091]

Here is my dimema. Cannot get my sewer hose to connect to the Y connection. Is there a adapter end i need to buy?

[Easton091]

The left connection on the hose hooks to the rv. The other end goes into the ground but wanna instead connect to the Y section then go into the ground

[JRTJH]

If I understand what you're asking, you are trying to connect the sewer hose "barb connector" to the "Y fitting" which is also a "barb connector". You need "the other end adapter"....

You could "RUBE GOLDBERG" it and use one of these in the first photo: Or you could use one of the Thetford adapters like the second photo. They are "pricey" to be sure, and you can likely find them for less than half the asking price on Amazon at this link: https://www.amazon.com/Thetford-40540-Adapter-SmartTote-Portable/dp/B007HRN650/ref=sr_1_7?s=automotive&ie=UTF8&qid=1526605423&sr=1-7&keywords=rv+sewer+hose+adapter

[jsmith948]

Here is my dimema. Cannot get my sewer hose to connect to the Y connection. Is there a adapter end i need to buy?

Why not purchase two 5' or 10' sewer hoses to connect the trailer ports to the "Y" and then connect your standard hose from the "Y" to the sewer?

Or...hook your standard hose to one port - dump and rinse - then move your standard hose to the other port and repeat?

[Carrottop]

Sorry could not resist.

16501

[emoji16]

[t_dogg80]

Hahaha. We watched this movie the night before I did my first tank dumps. This scene had me triple checking all of my connections. LolSorry could not resist.

16501

[emoji16]

[Easton091]

Great movie

[Easton091]

Found my solution...