Bedroom TV mount ???

[mskeyspirate]

:confused:Own a 2015 2400 Passport with the front bedroom. There is a place for a flat screen tv, however there is not much room due to the sliding pocket doors. Does anyone have any idea of where I can get a mount that will still allow those doors to slide closed. Called keystone, they acted like I was speaking another language. But if I ordered one with a tv, I bet they'd find a mount for it. Thanks for your help.

[t_dogg80]

We're in the same boat. I'm following this in case anyone has any suggestions.

[PARAPTOR]

Have you guys tried a search on the forum, I recall many posts on adding a bracket for an additional TV in various different rigs

[busterbrown]

This is what worked for me. Not many other options behind the sliding closet doors.

http://www.keystoneforums.com/forums/showpost.php?p=204361&postcount=11

[mskeyspirate]

:cool:Well after some looking, some questions, my search is over. Went to a Keystone dealer yesterday, and found the mount that they would use if I had ordered it when purchased. $69.00.... I thought that while I was happy to find it, I saw that it was manufactured in the same city as my camper. Elkhart In. So I came home, looked it up and ordered it $25.15, problem solved....Here is the info for any that need one....thanks for the help.https://shop.ramco-eng.com/search?type=product&q=MQS220

[mskeyspirate]

This mount is 3/4 of an inch deep....should give plenty of room for the doors.

[wiredgeorge]

I was in Walmart yesterday looking at TV mounts and they have essentially the same mount. The part that is bolted to the wall is almost exactly the same and the part that screws to the TV is essentially the same. The difference is that the Walmart TV mount had an arm that pivoted side to side 180 degrees and the tv could pivot on the arm end. The mount was made for up to 32" TVS weighing under 25 lbs. This is the one I saw:
https://www.walmart.com/ip/SANUS-VuePoint-Full-Motion-TV-Wall-Mount-For-13-32-TVs/51565680

[mikef]

Great detail for TV Mounting in 2400bh

http://www.keystoneforums.com/forums/showthread.php?t=28787

[mskeyspirate]

Well, thanks for the help and the time with my issue. Just wanted to take a minute to let folks know that while I appreciate the help. Any mount with that is not flat (non articulating) will not fit. Space behind the pocket doors just will not allow anything extra to fit in. Putting the mount in this weekend, so no more special rigging to watch tv in the bedroom. Thanks again. :bow:

[Elmo3700]

https://www.amazon.com/gp/product/B00E1TPWFE/ref=ox_sc_sfl_title_4?ie=UTF8&psc=1&smid=A17MC6HOH9AVE6

[Rubicon100]

I used the bracket with the 4 holes for a template and drilled the holes from the living room side through the wall and then I was able to mount the TV permanently using 2" screws through the wall. Doors now open all the way and I don't have to worry about the TV moving.
I hooked up an hdmi cable and cable tv cable and left them on when I mounted the TV so I can hook up to anything without removing the TV.