PDA

View Full Version : Furnace breaker failure


captain Morgan
03-07-2018, 11:13 AM
On my Cougar 327 RES the furnace keeps cutting out due to a 15 amp breaker failure. I have replaced the breaker and it has worked for a few days then it fails also. Have I just been unlucky getting faulty breakers or is something wrong with my furnace?

JRTJH
03-07-2018, 11:59 AM
The furnace is 12 VDC and should be protected by a fuse, not a circuit breaker. What circuit breaker (120VAC) is failing?

captain Morgan
03-10-2018, 08:48 PM
It's a tiny circuit breaker the size of a 12 volt fuse in the fuse panel.

JRTJH
03-11-2018, 06:02 AM
I would replace the "tiny circuit breaker" with an appropriately sized fuse and see if the problem continues. The "tiny circuit breaker" may be defective or "weak". If the fuse does not blow, I'd suspect the "tiny circuit breaker" is defective. If the fuse does blow, I'd contact the dealership (if you're still in warranty). If you're out of warranty (2 years on the furnace, 1 year on Keystone's wiring to the furnace) than I'd start looking for a problem with the wiring and/or inside the furnace.

captain Morgan
04-28-2018, 10:31 PM
Thanks for the info. Since the weather has warmed to above freezing, I have had no problems with the furnace. (?)