PDA

View Full Version : Hot water bypass


mollyharve
12-18-2017, 01:30 PM
Greetings all, I bought a 2018 199MLWE, so far love it. My question is, where is the hot water heater bi pass valve? The heater is located right rear corner, I don’t see any obvious locations, so, do I have to start pulling panels? Thanks for any help!

Buckeyexx
12-18-2017, 02:37 PM
It should be located on the back side of the hot water tank. Looking at interior pictures of the 199 it would have to be under the cabinet and next to your bath sink. The panel should have 2 screws holding it in. I have the 239 and I had to pull a panel under my bunks inside a cubby space that was located right behind my hot water tank. Hope that helps


Sent from my iPhone using Tapatalk

TheGriz
12-18-2017, 06:34 PM
Welcome to the forum and happy camping!!!! :marshmallow:

I had the identical floor plan in my previous TT...the Bullet Premier 19FBPR. The bypass is behind the panel in the bathroom under the wardrobe, the same panel where the heater duct is installed.

Hope this helps!
Mike

mollyharve
12-19-2017, 10:35 AM
Thanks guys found it, appreciate it!