Slide out cable guide

[roadglide]

The guide is 1/2 snap in Romex connection. I drummel it in half and cut out some to make it smaller the squeeze and pushed in. I'll look for 3/8 that would probably be less work fitting

[roadglide]

Photo 14530

14531

[Tbos]

Any chance you can post a picture of some Romex before you install it.


Sent from my iPad using Tapatalk

[Drydays]

You did Goood!!!

[roadglide]

Its a experiment will it last i thank so . I use white lithium spray grease on my cables that will help the pvc guide slick. Amazon 21764 1/2 Romex connector

[roadglide]

Photo 14530

14531
The guide's did not last :banghead:

[xrated]

A stainless steel cable vs. PVC "bushing" sliding through it = PVC loses. Nice try but it was doomed from the beginning.....sorry!

[dcg9381]

His point is that the aluminum is already losing, like it is in many of our RVs (mine included). Better to take it out on easily replace PVC.

[Sulphur1]

I've been following a number of threads about this problem as also have it!
After re-adjusting the Acu Slide's cables and leveling the Cougar 299 with raising blocks I'm hoping it won't get any worse. The cable / hole issues only seamed to appear after the 5er is towed by our higher bed Chevy 2500HD.
It was previously pulled level by a 2000 Chev dually.
The 5er has almost no use yet all the cable adjusting nuts were loose. Also added lock nuts.
Cheers
Jon