PDA

View Full Version : Using cable in campgrounds


Double b
06-24-2017, 04:14 AM
We finally bought cable to connect to campground cable where offered. Want to ask, seeing we never had a walk through with keystone rep, is there anything inside the trailer that needs to be turned on to make it work.

We finally found the boaster for the roof top antenna. So do we need to do anything for cable usage?


Sent from my iPhone using Tapatalk

jsmith948
06-24-2017, 04:32 AM
Turn the ant. booster off - on our trailer there is a short 'jumper' co-ax behind the t.v. connecting two wall mounted co-ax 'fittings'. We have to remove the lower end of the jumper and then plug the t.v. co-ax into that lower port. Then go into settings on your t.v. and select cable as your input.

ctbruce
06-24-2017, 04:33 AM
For cable to work the booster has to be off. (Booster on for over the air antenna. ) Then you have to run a scan on your TV to find all the available channels. Do this after you are hooked up and it will be different at each location you go to. Make sure your cable connectors are tight.

Sent from my SAMSUNG-SM-N910A using Tapatalk