TV bracket

[dennisc]

What kind of TV bracket do I need to hold a 32" flat screen TV outside there is already a bracket piece installed from the factory

[hdrolling]

Is it a "V" style bracket or the type that has two round holes one above the other?

[ctbruce]

http://www.pawinternational.com/tv_bracket/default.html

This may help.


Sent from my SAMSUNG-SM-N910A using Tapatalk

[marksiemer]

I am also curious about this. I have the one with two holes.

[ctbruce]

Dennisc and marksiemer: post pics of what you have will help.

Sent from my SAMSUNG-SM-N910A using Tapatalk

[hdrolling]

I am also curious about this. I have the one with two holes.

Is this what you need?

http://www.trekwood.com/products/448272/Bracket-TV-Wall-Mount-Plate-Only-Black-For-KRV-309694

[marksiemer]

https://www.trekwood.com/images/keystone/322700.jpg

This is what it looks like on the outside, but I need to bracket that connects to the TV so it can slide into.

[marksiemer]

Is this what you need?

http://www.trekwood.com/products/448272/Bracket-TV-Wall-Mount-Plate-Only-Black-For-KRV-309694

This is what it looks like on the oustide. I need the male bracket to connect to a TV.

[canesfan]

Is this what you need?

http://www.trekwood.com/products/448272/Bracket-TV-Wall-Mount-Plate-Only-Black-For-KRV-309694

I think that's what he HAS. I think he needs the other side that attaches to the TV.

There was a thread about this bracket a few years ago and I found some info from looking at mine. I'll see if I can find the thread.

[canesfan]

Read posts 18 and 15 http://www.keystoneforums.com/forums/showthread.php?t=27969&page=2

[marksiemer]

Dennisc and marksiemer: post pics of what you have will help.

Sent from my SAMSUNG-SM-N910A using Tapatalk

https://www.trekwood.com/images/keystone/322700.jpg

This is the bracket connected to the outside of the trailer, I need the male bracket that connects to the TV.

[canesfan]

Did you see my post above ^^^

[marksiemer]

Did you see my post above ^^^

Yes I did see your post. My problem is, the trailer i purchased did not come with a TV. So basically I have a blank wall in the trailer. I was hoping someone knew what I should purchase to mount the tv inside and be able to utilize the bracket on the outside too. Does this make sense? Hopefully i explained it right.:e:confused:

[hdrolling]

Yes I did see your post. My problem is, the trailer i purchased did not come with a TV. So basically I have a blank wall in the trailer. I was hoping someone knew what I should purchase to mount the tv inside and be able to utilize the bracket on the outside too. Does this make sense? Hopefully i explained it right.:e:confused:

Don't worry, we got ya. I wasn't sure if you needed the mount or the part that connects to the mount. Here is everything you should need.

https://shop.ramco-eng.com/collections/moview-mounts

[canesfan]

Thanks for that link HD, I couldn't find it. My exact model number isn't on their site anymore but it looks like it would be the same as this on with the locking pin and strap and works with the bracket you have
https://shop.ramco-eng.com/products/msslq12

[dennisc]

That's the same bracket 2 holes

[dennisc]

That's the same 2 hole bracket I need the 1 that matches up to that 1 goes on the back of the TV

[dennisc]

That's the same bracket I need the piece that goes on the TV

[PARAPTOR]

That's the same bracket I need the piece that goes on the TV

Can not see really good from picture of the reference that canesfan provided you in a previous post but looks like one that will work. I would assume if that bracket is on your rig from the factory, one of your inside TVs has the bracket that fits into there so an inside TV can be moved outside

[Jeepshots]

If you've only got the one bracket, and nothing to fit it (no TV inside, if i remember), why not get a whole new bracket to your liking? Pick up a low-clearance bracket and run with it. Something like this? https://www.amazon.com/PAW-International-Bracket-Piece-Black/dp/B01GTYXEDU/ref=sr_1_2?ie=UTF8&qid=1493237688&sr=8-2&keywords=rv+tv+bracket

Perhaps i'm not understanding the problem tho...

[dennisc]

I'm looking to purchase a bracket to use outside so I can leave the TV inside if you know where I can purchase the piece that attaches to the TV I want to use outside

[Jeepshots]

I'm looking to purchase a bracket to use outside so I can leave the TV inside if you know where I can purchase the piece that attaches to the TV I want to use outside

Oh sorry - i missed that crucial part. You have an outside bracket, nothing on inside, and you want to purchase an entire bracket set for the inside that will also work with the existing one on the outside. gotcha.

[dennisc]

I have the set up inside I would like to purchase a brack it so I can also use a TV outside I just need the part that attaches to the TV .

[PARAPTOR]

I have the set up inside I would like to purchase a brack it so I can also use a TV outside I just need the part that attaches to the TV .

Okay I think you have us all confused. let me take another shot at this. Based on what you stated in red, you have a complete set up inside (TV, bracket arms mounted to the TV and to a holder bracket on the wall). On the outside you have just a smaller wall bracket only.

From what I understand you do not want to snap (remove) that TV and attached arms bracket from the holder bracket inside which is attached to the inside wall and snap that whole thing into the outside wall bracket, Hope my understanding is good so far.

Therefore to put another new TV outside and use that existing wall bracket, you need to buy that complete unit less TV that you have installed inside (arms and wall mounted bracket). As I stated before the link canesfan has provided you in a previous post appears to be what you need less the wall bracket that comes with it. Basically what I am saying is I do not think you are going to find the bracket arms sold without the wall bracket that it snaps into. I would also see if you can get any information from that bracket assemble you have installed inside.

In summary I do not think you are going to find the arm bracket by itself, Going to have to buy complete assembly as identified in the canesfan link. If you look at the picture of the assembly in that link you see the hole slots the arm slide into. Hope this helps not sure how I can explain it any differently, maybe someone else can chime and explain it differently

[hdrolling]

Okay I think you have us all confused. let me take another shot at this. Based on what you stated in red, you have a complete set up inside (TV, bracket arms mounted to the TV and to a holder bracket on the wall). On the outside you have just a smaller wall bracket only.

From what I understand you do not want to snap (remove) that TV and attached arms bracket from the holder bracket inside which is attached to the inside wall and snap that whole thing into the outside wall bracket, Hope my understanding is good so far.

Therefore to put another new TV outside and use that existing wall bracket, you need to buy that complete unit less TV that you have installed inside (arms and wall mounted bracket). As I stated before the link canesfan has provided you in a previous post appears to be what you need less the wall bracket that comes with it. Basically what I am saying is I do not think you are going to find the bracket arms sold without the wall bracket that it snaps into. I would also see if you can get any information from that bracket assemble you have installed inside.

In summary I do not think you are going to find the arm bracket by itself, Going to have to buy complete assembly as identified in the canesfan link. If you look at the picture of the assembly in that link you see the hole slots the arm slide into. Hope this helps not sure how I can explain it any differently, maybe someone else can chime and explain it differently

I think what was confusing me is there is two different members asking for different things, that's why it's always best to start your own thread if your not looking for the same thing the OP is asking for.

To answer both dennisc (OP) and marksiemer, we first need to know what size TV your looking to mount outside.

I just had all my TV's and brackets stolen so I just ordered and received most of the parts your asking about.

The bracket I ordered that secures to the TV is made of plastic not metal, so for my 19" it's not an issue. If your planning on using a heavier TV then a different bracket will be needed.

[hdrolling]

What kind of TV bracket do I need to hold a 32" flat screen TV outside there is already a bracket piece installed from the factory

If you don't want the TV to swivel and just to have it slide into you bracket and be flush then this is all you need. It has the bracket and the two round studs that slide into your outside mount.

https://shop.ramco-eng.com/collections/moview-mounts/products/mq220vesa

[hdrolling]

Yes I did see your post. My problem is, the trailer i purchased did not come with a TV. So basically I have a blank wall in the trailer. I was hoping someone knew what I should purchase to mount the tv inside and be able to utilize the bracket on the outside too. Does this make sense? Hopefully i explained it right.:e:confused:

It will depend on what size TV you want, and if you want the TV flush or to be able to swivel and extend out?

[livelifefreely]

If you don't want the TV to swivel and just to have it slide into you bracket and be flush then this is all you need. It has the bracket and the two round studs that slide into your outside mount.

https://shop.ramco-eng.com/collections/moview-mounts/products/mq220vesa

Thanks hdrolling for posting the link. Been looking for a mount for our new camper and this was it. Huge help.
Just signed up on this forum today, and I've already benefited from it.
Thanks again!

[hdrolling]

Thanks hdrolling for posting the link. Been looking for a mount for our new camper and this was it. Huge help.
Just signed up on this forum today, and I've already benefited from it.
Thanks again!

Glad it helped, the info was passed onto me by fellow members while I was searching after our camper was broken into last winter.

[ctbruce]

Thanks hdrolling for posting the link. Been looking for a mount for our new camper and this was it. Huge help.
Just signed up on this forum today, and I've already benefited from it.
Thanks again!Welcome to the forum from Kansas City, MO! Glad you're here!

Sent from my SAMSUNG-SM-N910A using Tapatalk