PDA

View Full Version : Water pump backflow preventer


TheRealMacGyver
03-29-2017, 04:31 PM
My water pump will cycle about every 2 seconds. Also when hooked to city water it will fill and overflow my water tank! Should I just put another external backflow valve in or pull the pump and replace?

chuckster57
03-29-2017, 06:27 PM
Proper repair is replace the pump.

Tbos
03-30-2017, 09:22 AM
I looked at the crude drawing I made of the setup in the 238ML I had. The pump the only thing that isolates the FW tank from the city water feed unless there is another backflow in line that has failed. I think the pump needs to be changed. https://uploads.tapatalk-cdn.com/20170330/0c8e30b00e9826999eb330f8d04109d4.jpg


2016 Passport GT 2810BHS, 2016 F350 CC DRW

bobbecky
04-26-2018, 08:29 PM
This isn't a backflow issue, but is city water filling the fresh tank through the pump, and is not a health or safety issue. We had a failed check valve in our pump a couple years ago, which was filling the fresh tank. Not being where I could purchase a new pump, I went to the local hardware store and purchased a check valve along with a couple sharkbite adapters. I cut into the PEX line ahead of the pump and installed the check valve, which solved the problem. I later replaced the pump due to other issues. In the photo, the check valve is just left of center in the lower part of the picture.