Hyd slide problem

[Jscott76]

The hyd motor on my keystone Montana only clicks when the button to retract my slide of hydraulic levellers


Has anyone had this problem

I am leaveinf for Florida the day after Christmas and everything is closed till the new year

[Dhuhn]

You might want to see if your batteries are charged

[roadglide]

From what your saying the hyds are not working for the slide or levers. I'm assuming there is one motor and pump that operators evey thing HYd. Hyd system are normally bullet proof and your saying a click when you operate the switch. I would look for a poor wiring connection or switch.

[chuckster57]

I would check the battery(s) first, then the connections. If you can get to the pump, and the leads, you can apply 12V directly to the pump to rule out pump failure.

[ChuckS]

Wonder if he got it fixed

[JRTJH]

Wonder if he got it fixed

jscott76 made the post at 4:23PM on 12/24, then immediately signed off the forum. To date, he has not returned, so it looks like he hasn't seen any of the responses to his question. He did relate that he was leaving the day after Christmas for Florida, so he may be "on the road" and unable to access the forum. Hopefully he will return and give us an update on his slide problems.