Question on Slideout linkage

[LZScout]

I was lubing my slideouts and notice that the hydraulic push/pull bars have a lot of slack in the adjustment nuts (see attached). Are they supposed to and what is the purpose?

http://uploads.tapatalk-cdn.com/20160629/d8be02cb16b2b6f7bd15ef9d9bf74df2.jpg


Sent from my SM-G925V using Tapatalk

[chuckster57]

Yes the slack (gap) is suppose to be there. They are set to the point needed for full extension and retraction of the slide.

[LZScout]

Thanks!


Lantz