Satillite tuner install 3721RL

[jwakeman]

How do I route the sat connection to the tuner setting beside the radio and from the tuner back to the TV. I see no access holes in the shelf where the tuner will set. How did you solve the problem?

[notanlines]

A handy-dandy 1 1/2 inch bit on the end of the also handy-dandy drill motor does the trick. Ours had to carry the electric plug also hence the large hole. Start the hole on one side and when the sharp point starts to come through just swap to the opposite side.

[WaltBennett]

I went one further and bypassed the trailer coax entirely. Our TV is at the rear along with DVD and sound amp, so I drilled a hole out through the end cap and mounted an external coax covered connector there. That way someone can watch the bedroom TV separately on CG cable or antenna.