Tv mount on 272 bhs

[johnwally]

Was wondering if and how people mount there tv's on the opposite side of the entertainment center? When I bought the trailer they said I could. Was also thinking on removing the sliding doors.

Sent from my SM-N920V using Tapatalk

[GaryWT]

So the tv does not turn? Is these a place up in one of the corners for the tv to go.

[4LowNGo]

There's a couple good threads about this topic if you can do a search.

[johnwally]

So the tv does not turn? Is these a place up in one of the corners for the tv to go.
The tv panel does not swivel. Seems to be a stud of some kind to mount . Would really like to be sure before putting a screw into it. Nothing in the corners. Thx

Sent from my SM-N920V using Tapatalk

[JRTJH]

If you're using the common wall behind the existing TV, you know it's mounted into studs or a "strong enough" backing. You could use the back of that common wall and mount your new TV in essentially the same place. If the wall is "studded" on the LR side, it should be "studded" on the BR side as well.

[johnwally]

If you're using the common wall behind the existing TV, you know it's mounted into studs or a "strong enough" backing. You could use the back of that common wall and mount your new TV in essentially the same place. If the wall is "studded" on the LR side, it should be "studded" on the BR side as well.
That's what I was thinking on doing. Thanks again

Sent from my SM-N920V using Tapatalk

[JRTJH]

If you're considering removing the sliding doors to clear the TV mount, you might consider mounting a 2x8 on the wall (finished to match) so the doors will slide behind the TV without hitting it. That way you'd still have the doors for privacy if needed.

[johnwally]

If you're considering removing the sliding doors to clear the TV mount, you might consider mounting a 2x8 on the wall (finished to match) so the doors will slide behind the TV without hitting it. That way you'd still have the doors for privacy if needed.
Thank you. I will keep that in mind if I do remove them.

Sent from my SM-N920V using Tapatalk

[esmoglo]

I did this to my Passport 2810BH went with a small TV holds on the wall just fine. Will take a few photos and post them.

[johnwally]

Thx again.

Sent from my SM-N920V using Tapatalk

[mfifield01]

When I mounted mine, it seemed to be only backed about half way. Just make sure you get it mounted on the backed side. Here are some pics.

[esmoglo]

Here's mine installed went with a small 20" TV no need for a large one bedroom is tiny works well did not break the bank TV is light works well. Sorry for the bad iPhone pic

[johnwally]

Thx so much for the pictures.

Sent from my SM-N920V using Tapatalk