Tongue Jack Fuse Location?

[Bryan2asu]

I have a 240MK and the Jack stopped today. No in line fuse visible and no fuse in panel. Any ideas?

[JRTJH]

Follow the two wires from the jack motor back to the battery. If you don't see a fuse in the wiring harness between the two, then there isn't an external fuse. There may be a "fusible link" inside the jack. Some manufacturers add an "in line" fuse, some install a "auto reset breaker" and some just run the wire and directly connect it to the battery.

If you "run the wire" and don't see a fuse, then there's not one installed.

[14george]

Hot a 2015 looks like it goes to a fuse on the side of frame

[B-O-B'03]

Mine has an in-line fuse, in the red wire, before it connects to the power junction box on the A frame.

Good luck.

-Brian

[chuckster57]

Hot a 2015 looks like it goes to a fuse on the side of frame


If it's mounted to the frame, and has 2 posts with small nuts holding the wire, that's an automatic resetting circuit breaker. Lots of electric tongue jacks only have a power lead, and are grounded using the 3 bolts that hold it to the frame.