ReadyToRoll
06-25-2015, 06:56 PM
So, the cabinet over the kitchen sink is high and deep. Into the corner, over 2' distance. Hard to see let alone reach objects in the cabinet. So, went to the local hardware store and purchased a pair of 18" drawer slides and a swivel pedestal assy. Fabricated a drawer bottom out of a piece of 1x12 approx. 18" in length. Then, purchased a 24" circular lazy susan base and attached it to the drawer bottom via the swivel plate. Went to Hobby Lobby and purchased a sheet of 1/16" clear plastic sheeting and cut to about 3" width and screwed it to the edge of the round susan so as to be able to enclose the circle with a clear but stable edge to hold objects from coming off during travel times. I did have to fabricate another bottom (1x12 board, front to back corner) for the cabinet to support everything and also to raise the drawer slides over the cupboard front edge. Works great and now can even pull out the lazy susan for easier viewing and access still.