tee handle

[Bigdog55]

Help I'm the second owner of a 2010 Raptor RP3912 and I'm having a problem with dumping of the second bath in the garage area looking for the dump valves. I know on the drivers side the a compartment with one set of dump valves which do the main bath and kitchen sink I think. Location for the other set of valves if there is any. I need to dump this bad.

[Wing-in-it]

Look along the frame near the axles on the trailer.

[Bigdog55]

I looked along the rail i didnt see anything

[chuckster57]

They can be a real bugger to find. Look at the underbelly for any signs of a shaft sticking out, may have broken off. I've seen them right behind the wheel and you have to be a contortionist to reach it.

[Bigdog55]

I checked really didnt see anything broken off. I will get under in the morning and see if i see anything along the fram near the wheel or on the frame.
Thanks:)

[audio1der]

The aluminium T-handle rods are notorious for breaking but fortunately they are threaded, so repairs can be done on the spot (ask me how I know).
You might be looking for only a hole the size of your finger in the enclosed underbelly, but a pair of pliers can grab the male threaded portion which the handles thread onto to dump if needed.
*Be careful not to damage the threads!!