Dometic DM2862 refrigerator wont run

[bigbluejmc]

I have a 2012 DM2862 and was working fine a few weeks ago. Today getting ready to go out and no cooling. All lights work on the front panel and inside. On GAS the furnace comes on, but no fan o cooling. All I hear is a relay click and nothing else.

Any ideas???

[gearhead]

Is it showing a code? Like E2 or E3?
There should be a reset switch near the burner tube/flue/chimney. Mine is black and maybe 1/8" diameter. Wire to it, and a wire out.
Mine has been to the selling dealer twice and is currently parked at an independent shop. Be 2 weeks tomorrow. The tech found a loose fuse holder today and thinks that may have been "it".
We'll see.
https://www.google.com/?gws_rd=ssl#q=dometic+dm2862+troubleshooting
http://www.justanswer.com/sip/dometic?r=ppc|ga|2|Cars%20-%20RV|Dometic&JPKW=troubleshooting%20dometic&JPDC=S&JPST=&JPAD=36924078658&JPAF=txt&JPRC=1&JPMT=b&JPNW=g&JPCD=20120920&JPOP=Janine_GimmeAMinute_trans&mkwid=sagEAsfhj_dc&pcrid=36924078658&pkw=troubleshooting%20dometic&pmt=b&plc=&gclid=Cj0KEQjw7b-gBRC45uLY_avSrdgBEiQAD3Olx2D8h_e2rTjf-z1JQU_PHdUiOPo7LJxsd3-wBq7t_rEaAiTu8P8HAQ

[bigbluejmc]

Is it showing a code? Like E2 or E3?
There should be a reset switch near the burner tube/flue/chimney. Mine is black and maybe 1/8" diameter. Wire to it, and a wire out.
Mine has been to the selling dealer twice and is currently parked at an independent shop. Be 2 weeks tomorrow. The tech found a loose fuse holder today and thinks that may have been "it".
We'll see.
https://www.google.com/?gws_rd=ssl#q=dometic+dm2862+troubleshooting
http://www.justanswer.com/sip/dometic?r=ppc|ga|2|Cars%20-%20RV|Dometic&JPKW=troubleshooting%20dometic&JPDC=S&JPST=&JPAD=36924078658&JPAF=txt&JPRC=1&JPMT=b&JPNW=g&JPCD=20120920&JPOP=Janine_GimmeAMinute_trans&mkwid=sagEAsfhj_dc&pcrid=36924078658&pkw=troubleshooting%20dometic&pmt=b&plc=&gclid=Cj0KEQjw7b-gBRC45uLY_avSrdgBEiQAD3Olx2D8h_e2rTjf-z1JQU_PHdUiOPo7LJxsd3-wBq7t_rEaAiTu8P8HAQ
Thanks for the input and I did noticed that the reset switch was out on the flue, but resetting it did not help. I finally gave up after looking around for an hour or two and took it to the dealer. They think it is the control module since the gas burner will come on when selected but not fan or cooling. Will see what they tell me...

[gearhead]

Sounds like they're on it.
How's that cold front treating you? Snowing yet?!

[bigbluejmc]

Today is not to bad at 67deg, but tomorrow we will have a taste of fall with lows in the 40s. I hope this is not a sine of what is to come....Florida here we come...

[hankpage]

Today is not to bad at 67deg, but tomorrow we will have a taste of fall with lows in the 40s. I hope this is not a sine of what is to come....Florida here we come...

Save a spot for me!!!!! :D