PDA

View Full Version : LED Tail Lights - Part 2

homer3
08-16-2014, 01:38 PM
Tried to upload side by side comparison with the new compared to old, file to large. Anyway I'm sure you get the idea. The difference is more than I expected. Glad I switch them out.
JRTJH
08-16-2014, 02:24 PM
Looks good, I'm sure the people following you will appreciate the brighter lights !!!
Jameskirk
08-16-2014, 04:38 PM
Looks good. Was it a standard fit?


Sent from my iPhone using Tapatalk
homer3
08-16-2014, 09:59 PM
Perfect fit, no problems. Covered old light area and previous hole perfectly. Save old screws for upcoming projects. So simple to install. spent a lot of time conversing with JRTJH (Thanks), asking questions, he was very helpful. Hardest part was running a fish line down behind trailer wall to pull license plate wire.
Yosemitebob
08-16-2014, 10:18 PM
So I'm curious, why did you have to fish for the license plate light, should it not have been with the rest when you changed the regular out with the LED's?
homer3
08-17-2014, 07:43 AM
LED's are separate by themselves, they do not have a licensee plate bracket. Bracket was bought separately and mounted separately. Made a second hole about six inches below taillight hole and fished wire to there. A little tight, but great fit.
Yosemitebob
08-17-2014, 11:44 PM
I get it, nice work by the way.
Bulletproof
08-21-2014, 07:50 PM
Much better curb appeal and modern look!
{tpc}
08-22-2014, 06:32 AM
I like it as well. So many things I want to do to mine...so little time (and money!).
webslave
08-25-2014, 02:55 PM
LED's are separate by themselves, they do not have a licensee plate bracket. Bracket was bought separately and mounted separately. Made a second hole about six inches below taillight hole and fished wire to there. A little tight, but great fit.

Depending on the units (LED) that you get, some have the license plate bracket and light as a part of the entire assembly. The Bargman LED tail lights I used came with the license plate bracket and light as part of the tail light assembly itself - no need to fish a wire or mount another license plate bracket:

http://www.keystoneforums.com/attachments/photobucket/img_141489_0_a0da92f433e8c427756f7303f8853a64.jpg
Campnfireman
08-25-2014, 03:13 PM
Webslave do you have a part number?
dirt33
08-25-2014, 06:36 PM
Webslave do you have a part number?

(Just jumping in here to help with the part number... I know webslave would do so as well once he sees this post)

http://www.etrailer.com/Trailer-Lights/Bargman/47-07-002.html
http://www.etrailer.com/Trailer-Lights/Bargman/47-07-001.html
Campnfireman
08-26-2014, 03:26 AM
Thanks dirt. So much easier with a link!