PDA

View Full Version : Vicali's Build Thread; Mods, Camps, Fun


vicali
05-05-2014, 06:22 AM
2011 Hideout 19flbwe, bought new in 2012.. previous owners only camped a handful of times, options added; Fantastic fan, 30lbs Lp tanks, Tank flush system, brand new dual 6v batts..

Here it is hooked to our Tacoma;
http://farm4.staticflickr.com/3723/9886748463_1af9b79913_b.jpg

vicali
05-05-2014, 06:27 AM
These are the ones I ordered from 2011_led for my Hideout's interior lights;
10x-T10-194-921-168-Bulb-Lamp-24-1210SMD-LED-Warm-White (http://www.ebay.com/itm/10x-T10-194-921-168-Bulb-Lamp-24-1210SMD-LED-Warm-White-/170674549926?ssPageName=ADME:L:OC:CA:3160)
I needed 15 LED's so I ordered 2 sets @ $17.88

https://farm8.staticflickr.com/7385/14026216556_72ba1eb559_b.jpg

LED is on the left, regular 921 incandescent on the right;
https://farm3.staticflickr.com/2911/14049808104_ee1f60e8f4_b.jpg


Every one clicked in easily, the entire changeover took less than 5 minutes, and now I've got 5 spare LEDs and 15 spare bulbs just in case.

vicali
05-05-2014, 06:27 AM
Porch;
36 1210SMD White Warm 1156 (http://www.ebay.com/itm/12V-Dome-Bulb-36-1210SMD-LED-White-Warm-White-Adapter-BA9S-921-Festoon-1156-1142-/171252447218?ssPageName=ADME:L:OU:CA:3160)


Scare;
48 5050SMD Bright White 1156 (http://www.ebay.com/itm/1pc-BA15S-1156-1141-Dome-Bulb-48-5050-SMD-LED-Super-Bright-White-48P5A-/181038850210?ssPageName=ADME:L:OU:CA:3160)

https://farm8.staticflickr.com/7338/14085416591_1c57990a3c_b.jpg

https://farm8.staticflickr.com/7060/14085416481_c15c2052ff_b.jpg

https://farm8.staticflickr.com/7361/13902007079_9739df2b72_b.jpg
:D

vicali
05-05-2014, 06:29 AM
One little thing I had to fix is the fuse panel door, the small 'clicker' latch a the top center appears to be broken, it doesn't latch and the fuse panel ends up falling open.

(right in the top center of the panel is the little clicker-latch;
http://hitchrv.interactrv.netdna-cdn.com/src/min.ashx?height=600&width=800&img=/images/inventory/361448_56.JPG

When we bought it the PO had a strip of electrical tape holding it closed,

I ended up connecting with John at WFCO tech support and he sent me over 2 new clickers, one worked like a charm and the other went into my 'spares' toolbox.

I wish other companies had such great tech support.

vicali
05-06-2014, 06:53 AM
Here is the plumbing setup I used to replace the Lakeview RV Supply Model 1000 vacuum break valve that sprayed all over the inside of the cabinet the first time I tried it.. Discussed here (http://www.keystonerv.org/forums/showthread.php?t=4656&highlight=vacuum) and here (http://www.keystonerv.org/forums/showthread.php?t=2832)..

Replaced it with two sharkbite 90 bends and a sharkbite checkvalve plus a vacuum break at the attachment outside when I'm using it.

https://farm8.staticflickr.com/7324/13936117049_b028ab5170_b.jpg

Also tracked down the proper propane fittings to allow me to run both a Coleman stove and our BBQ off of a 20lb tank at the picnic table, It's got a QCC for the bbq and a POL for the stove;

http://www.keystoneforums.com/attachments/photobucket/img_125998_1_34cda2e1c50ebc52944399667585fa3a.jpg

vicali
05-06-2014, 06:58 AM
Spent the evening cleaning out the trailer and wiping out every corner, now anything in there is our mess :D

Realized that I had missed the stove light while I was LED'ing everything- happy to find it was another 921 bulb so I already had a replacement LED for it.

I've dewinterized and am currently sanitizing the tanks..
btw, this forum is awesome, I'm glad I found it.

wallet14
05-09-2014, 08:13 AM
Welcome. It seems that you are well on your way to making this your camper! This forum is wonderful and has been a great resource for us in our travels. Continue to share as you customize and find fixes that others could benefit from.

Pook-60
05-11-2014, 03:53 AM
Looks great Mike. Appreciate the clues on the plumbing.

TX
Dane