First Modification on Bullet TV Bracket

[JimQ]

Hello to all on this forum. I've been reading and learning so much about RV's on this site. It is awesome. We are ready to go on our first weekend trip this Thursday in our new Bullet 248 RKS. We have been using it parked in the yard, getting use to it and running/checking out all the systems. Everything is good. The TV mount didn't tilt so I ordered a mount from MONOPRICE. com: Adjustable Tilting Wall mount bracket MHT-26(T). Around $5.($11 for shipping, ouch!) Still, not that bad. I removed the existing flat TV mount from the trailer, marked it, drilled three holes in it(one hole lined up) and mounting the new tilt plate to it using stopper nuts with the plastic inserts. Very easy job. What a difference the 15 degree tilt down makes in the picture quality, not to mention it's easier on your neck. I locked it in at this angle and will leave it. For travel, the strap still reaches around it. To protect the edge of the TV from any possible movement against the wooden cabinet during travel, I cut a piece of 1/2" foam pipe insulation and slipped it on the edge of the TV. Perfect fit. I ordered a topper for the slideout and that will be installed at the dealer in a couple of weeks. If there are any issues with the new trailer, I'll address them at that time. Wish me luck on our first trip!!(tx) Oh yes, I forgot: I also mounted two aero-flo roof mount covers! Nice!!

[filmtex]

We have a 248RKS as well and the first mod we did was replacing the tv mount with one that tilts and moves. Makes all the difference for sure. We replaced the tv with a larger smart tv from Vizio a couple weeks later and will mount the old one in the bedroom as soon as I find a mount I like.

[JimQ]

Try Monoprice.com for a mount. They have great prices. The one I bought is made of steel, very sturdy!!

[filmtex]

Thanks for the tip, Jim, I did find a mount there that I like, going to order it next week.

[grumpygregg]

We have a 248RKS as well and the first mod we did was replacing the tv mount with one that tilts and moves. Makes all the difference for sure. We replaced the tv with a larger smart tv from Vizio a couple weeks later and will mount the old one in the bedroom as soon as I find a mount I like.


Do you have any pics of your new bigger tv? And what size did you go with? I am in the process of buying a 248rks and I know the DW will want a bigger tv in the living area.



Sent from my iPad using Tapatalk

[filmtex]

I don't have any photos with me. I'll try to get some the next time we're up at the RV. It's about 5 hours away from home but we're going up there for the 4th. Check back...

[grumpygregg]

will do... Thanks. Do you know what size you went with. I am thinking a 32" might work.



Sent from my iPad using Tapatalk

[bellsharbor]

OK you guys!! I have the new tilt mount and was planning to take out the TV and drill the holes but now you have me thinking about a bigger TV too! I didn't think a larger one would fit with the cabinet sticking out on the right. If anyone has had any luck--please let me know.

[JimQ]

I think a larger TV there would work. You wouldn't have to push it in flat against the wall for travel. Put a piece of pipe insulation on the right edge and push that side into the edge of the stereo cabinet. The other side of the TV should be pushed against the wall. ( Another piece of pipe insulation or a sticky felt pad on the TV at the contact point against the wall to prevent any scratches). Then adjust the travel strap to secure it. If it's not long enough, remove and add a longer strap. I just added a second TV in the sleeping area. A 24" Insignia with built in DVD player. On sale at Best Buy internet only, free shipping!. Install was a snap. Again, I ordered the mount from Monoprice.com. If you need the part number let me know, I'll look it up and post in. Also just installed extra shelves in the bedroom closets and bathroom closet. 3/16 MDF board from Home Depot using pre-finished moulding for the rails, 3/4" wood screws. No problems. Loving this trailer so far.I did remove the bumper mounted grill. Didn't like the location for grilling right next to the entry door.

[grumpygregg]

JimQ you know we like pictures.....


Sent from my iPad using Tapatalk

[JimQ]

I know grumpygregg! I will try to post pics later today if I can figure how to do it. LOL

[JimQ]

6425

6426

6427

6428

6429

Here are some photos of the Rear TV in the travel position with the tilt down installed. Notice the piece of the gray pipe insulation against the cabinet. The second TV/DVD is in the bedroom, mounted using a full articulating arm mount/with tilt down. The travel strap is homemade using straps from old luggage, key rings, and a steel clip attached to the frame with a sheet metal screw. The wall mount is being held with 2 large sheet metal screws which went into the area that was labeled as such. There is also a pic of the shelves in the bedroom closet.I'll post a couple of more pics shortly of bathroom shelves and material used. Hope this helps. Jim

[JimQ]

6430

6431

6432

Pics of bathroom shelves, and the material used. The MDF board is lightweight, smooth and strong enough for this application. It comes in 2'x4' pieces. The molding is pre-finished plastic type material that I drilled a pilot hole prior to install. The screws I use are #6 wood screws, 3/4 of an inch long. Decide on the height of the shelve you want to install, cut a piece of scrap wood to that height minus the thickness of the molding and you are good to go. Simple, cut the shelve to size, install one side rail, place the shelve in the cabinet raised up on the side without the support rail , install the second rail, and push shelve down. Your done !! Hope this helps. Jim

[grumpygregg]

Thanks Jim. I am hoping to pick up my new 248rks in the next week or so. this has me thinking about mods already.


Sent from my iPad using Tapatalk

[JimQ]

Your Welcome Greg: Good Luck on your new trailer. We are having a blast this year so far. Jim

[bellsharbor]

Thanks for the pics Jim. You did a nice job. What size is the TV up front?

[JimQ]

The TV up front is a 24" Vizio that came with the trailer. Just got back from camping in Ct. this weekend. Arthur tried to ruin the Fourth, but we all had a great time despite the rain!!

[grumpygregg]

filmtex, were you able to get any pics of you bigger tv while you were out this past weekend? I am getting excited I pick up the new camper on the 19th.


Sent from my iPad using Tapatalk

[filmtex]

Actually, I did remember to grab a couple pictures. Just moving them from my phone right now as I sit in the airport-bear with me.
Sorry about the snake-nest, I haven't had a chance to really tighten things up, been pretty busy. Hope you get the idea. The tv is a Visio 27" Smart tv and we think its a great addition to our coach. I know the mount is crooked but we really wanted our son to be able to see the tv from the foldout couch. He's a tv freek like me! It works. For travel I just kind of wedge it in the corner and secure the mount with the strap. I'll be bringing the rv back down next weekend so I'll really have to make sure its all set to go. Probably get some of the pipe insulation as suggested.

[grumpygregg]

That looks great thanks for the pics.


Sent from my iPad using Tapatalk

[JimQ]

I also hung a piece of black material attached with velcro tape behind the TV to hide all the wires.

[filmtex]

Just a quick follow up. We moved our Bullet about 350 miles on tough Texas roads yesterday and the tv/mount worked great. Just kind of pushed it over next to the wall and that was it. I guess the big mount did the trick.

[JimQ]

That's good news Filmtex. Hope you are enjoying your Bullet as much as we are!! Headed to Mystic, Ct. this Friday for the weekend.