PDA

View Full Version : Remote Control


RedRover
03-19-2014, 12:53 PM
Having a problem making the outside switch work for the landing gear. The remote works fine so I am not in too much trouble. Do I turn something on/off to make it work correctly?
2014 Cougar 313RLI

JRTJH
03-19-2014, 01:58 PM
If the battery remote cutoff is turned off, it may affect the outside switch. Some are wired that way to keep kids/vandals from being able to use the switch. Also, the 30 amp inline fuse from the motor to the battery may be blown. Follow the pink wire from the landing gear motor into the wire loom and you'll find the inline fuse holder. Check that fuse. On most it's a 30 amp, on some it's a 40 amp.

Albert
03-19-2014, 02:36 PM
Had the same problem with mine last year. The remote worked everything, however the switch for landing gear would not. Traced it to the 30 amp blow fuse.

Found out that if I overextended the landing gear the fuse would blow every time.

Good luck

RedRover
03-19-2014, 03:15 PM
Both of you guys were correct, 30 amp fuse blown, just as you suggested.
It would have taken me a long time to track down that fault, not to mention the anguish. Thanks to the both of you for your prompt and accurate replies.
The checks are in the mail.

JRTJH
03-19-2014, 04:16 PM
http://www.sherv.net/cm/emo/word/youre-welcome-smiley-emoticon.gif (http://www.sherv.net/)

Glad it wasn't anything more serious

denverpilot
03-19-2014, 09:15 PM
They make 30 amp breakers with automatic reset that fit a standard fuse holder, with the cover removed. A number of folks have recommended them to me for the landing gear fuse. That said, a box of assorted range fuses was on sale at Harbor Freight one weekend for $3. There's 10 30A fuses in the box, besides all other common sizes. The little fuse box now lives in the 5er.