stang233
08-11-2013, 07:55 PM
I have a set of Lippert Corp, Quick Draw beds that have been trouble free. Last trip while putting the beds up we heard a clunk sound while returning to the upright position. Nothing was caught so we assumed it was okay. Well its not.
It seems that the front right corner has skipped a link or something on the chain. The right corner is about an inch lower then the rest. The operation up and down is still just fine. I cannot for the life of me figure out how these beds even work. Does someone have some insight I hope. See pic below.
There is no way to open up the top rails and see if the chain is okay or not? Any other ideas would be helpful.
http://www.keystoneforums.com/attachments/photobucket/img_91366_0_db2678ef8a172e379e1858b9ad14f6f9.jpg (http://s4.photobucket.com/user/stang233/media/IMG_20130811_203907_041.jpg.html)
It seems that the front right corner has skipped a link or something on the chain. The right corner is about an inch lower then the rest. The operation up and down is still just fine. I cannot for the life of me figure out how these beds even work. Does someone have some insight I hope. See pic below.
There is no way to open up the top rails and see if the chain is okay or not? Any other ideas would be helpful.
http://www.keystoneforums.com/attachments/photobucket/img_91366_0_db2678ef8a172e379e1858b9ad14f6f9.jpg (http://s4.photobucket.com/user/stang233/media/IMG_20130811_203907_041.jpg.html)