CACougar
08-08-2010, 09:34 PM
My Cougar 27SAB Xlite came setup with a small shelf mounted on a interior wall for a small CRT. We have removed the shelf as as it is a head knocker while trying to walk by it, I would like to install a small LCD panel in the same location.
I cannot locate studs or determine if there is any backing on this interior wall that seperates the bedroom from the bathroom.
The flat screen that was installed Keystone has a large metal backing plate that allows you to screw the plate in multiple points to distribute the weight over a large area, this location also has an added layer of backing.
I have read that the Keystone Xlite products lack many of the blocking or backing to keep overall weight down.
Any suggestions?
Thanks
I cannot locate studs or determine if there is any backing on this interior wall that seperates the bedroom from the bathroom.
The flat screen that was installed Keystone has a large metal backing plate that allows you to screw the plate in multiple points to distribute the weight over a large area, this location also has an added layer of backing.
I have read that the Keystone Xlite products lack many of the blocking or backing to keep overall weight down.
Any suggestions?
Thanks