slide out not working properly

[hounddog46]

I have a 06 mountaineer 328rls,slide outs will not operate,push button and one slide goes out part way,then give it a rest and it will go out the rest of the way,this happens with all three,I hear the breakers clicking,could they be weak or worn out.

[Festus2]

You might want to check the condition of your battery. In order to function properly, the slide out needs a battery that is fully-charged and in good condition. Try hooking up your tow vehicle to the Mountaineer with the connecting cord, start and run your truck engine, and then try your slides again. If this works, it is most likely your battery.

[hounddog46]

Thanks,but I have two new batteries parrelled,and good voltage

[chuck&gail]

On our TT there is a circuit breaker on the frame next to the battery. It is an auto reset. When it failed it did just as you describe. Follow battery cable and see if you have a breaker also.

[slewis95407]

hounddog46

I had same problem on one of my slides. The rubber seals were sticking and causing more drag. Used 303 protectant or silicon spray on seals and sides of slide out, all OK.