Couple of door repairs

[GaryWT]

Made a couple repairs that were needed after the first 2 trips. First the bathroom door did not close or open well, it was too tight. We took off the plastic molding and carved into the wall some, reinstalled molding and now it works much better. Next the screen on the bathroom outside door would stick and the door would not open from the outside. We removed the door and drilled new holes to move it over slightly. Now we can open it. Should make the next trip better.

[fla-gypsy]

A trick I learned building a long time ago was that a block of wood and a hammer will adjust tight door frames with little difficulty without any disassembly