PDA

View Full Version : Window blinds in Keystone Bullet - Stoopid Questions


SGardiner
05-24-2013, 04:33 PM
I am sure there is a simple answer to this, but I cannot figure out how to open the window blinds on our new Keystone Bullet:confused:

Do I need to remove the strings from these brackets? Remove the screws? Not sure what I am missing here?:banghead:

http://www.keystoneforums.com/attachments/photobucket/img_79284_0_4cea42311cd5f24261863abdff69bcd8.jpg (http://s72.photobucket.com/user/ScottGardiner/media/IMG_0355_zps0e786005.jpg.html)

http://www.keystoneforums.com/attachments/photobucket/img_79284_1_9942b3e9ce69a31085939da4f1c729ba.jpg (http://s72.photobucket.com/user/ScottGardiner/media/IMG_0356_zps5925b32b.jpg.html)

davidjsimons
05-24-2013, 04:48 PM
Just push them up from the bottom. Do not un-tie anything.


Sent from my iPad using Tapatalk

Bluewater
05-24-2013, 05:38 PM
Just life stright up on the plastic endpiece with two hands so it move straight up.

Pawpod
05-24-2013, 05:42 PM
We have the same ones, sometimes we have to pull them slightly away from the window and up. Seems they get hanged up on the window hardware. Like them a lot better than the metal blinds.:)

hankaye
05-24-2013, 05:43 PM
SGardiner, Howdy;

Sometimes the window crank knob may hold it down
so gently pull it (plastic bar at bottom), away from the knob and then raise it.
The supper indent (still at the bottom), will raise the darker part so you can have light, yet so amount od privacy.
Got it ??? :). Easy-peasy "bouncey:

hankaye

KanTC
05-24-2013, 06:53 PM
The 'short' video below is a house window shade, but it's the same technique.

If you have day/night shades, it will be 2-toned (light & dark) fabric, like the video. If you have night shades it will be 'only' the dark fabric.

Unlike the lady in the video (who only uses one hand in the center), you'll probably need to use 2 hands on your RV blinds & even pressure
(near the outer edge of both sides at the same). 'Push' blinds up to open, & pull down to close. As others have said, the window 'knob/crank'
may get in the way depending on each window design - gently pull the blind out/over the 'knob/crank' first.

http://www.youtube.com/watch?v=FiW8bctAiCk

Hope this helps.
Terri, the Chevy co-pilot :)

SGardiner
05-25-2013, 02:25 AM
Thanks for the help.

I figured it was something simple. I didn't realized it would be that simple.(ty)