PDA

View Full Version : fully extended?


freddie
04-18-2013, 09:19 AM
2010 keystone hideout 30bhds the rear slide out does not slide out all the way.
The bottom of the slide goes all the way but the top of the slide out still needs to go 4-5"any one know what I should do or try.thank you in advance.:banghead:

Englishman
04-18-2013, 09:41 AM
I would check to see if anything is sitting on top of the inside of the slider.

SteveC7010
04-18-2013, 10:21 AM
I would check to see if anything is sitting on top of the inside of the slider.
Agree. There really is not an upper mechanism on the large slides. The whole thing extends based on the slide works under the floor. If it is a large slide, I would bet that there is something sitting up there. Run the slide in just a few inches and then go inside and look up on the top of the slide behind the decorative flange.

Now, on the smaller slides that use the cable and roller mechanism, it's possible that there is a problem with the system.

freddie
04-22-2013, 05:56 AM
thank-you for the help.