|
|
05-21-2019, 01:14 AM
|
#1
|
Member
Join Date: Mar 2019
Location: Rochester
Posts: 48
|
Residential kitchen faucet
Was thinking about putting a nice resendential kitchen faucet with a pull out sprayer in my 2018 springdale 2980..Took a glance under the sink the other day and quickly noticed that these things areas were not made for normal size guys to work in..Got me thinking that i cut the pex rate below where the faucet supply line hook up too and then dissconnect the faucet..I could then hook up new faucet supply lines to 2 shark bites with shutoffs then feed those through the top of the countertop then all I would have to do is click them in underneath.
|
|
|
05-21-2019, 04:11 AM
|
#2
|
Senior Member
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,223
|
Well getting the fittings through the counter top hole(s) might a bit tough. Have you thought of laying some pads on the floor and working laying on your back?
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
|
|
|
05-21-2019, 02:54 PM
|
#3
|
Senior Member
Join Date: Mar 2018
Location: greensburg
Posts: 124
|
Had to change my island kitchen faucet out,it was easy to do,but very difficult to work in under the cabinet.
And I am a small person only 5'3" inches tall
|
|
|
05-29-2019, 07:39 AM
|
#4
|
Member
Join Date: Apr 2019
Location: Cedartown
Posts: 39
|
just about have to be a contortionist to pull the dump valves, I can't imagine trying to get under the sink to change the faucets
|
|
|
05-29-2019, 10:12 AM
|
#5
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Mine had a dishwasher below the sink leaving only about 8" of space above it to make all the connections & only about 2' of floor space between 2 cabinets to fit my portly frame into, but I got'er done.
I told DW that if I were 3' tall with 6' long arms with 2 maybe 3 more joints & an eye I could remove to point up behind the sink to see what my hands were doing the job would've been a piece of cake.
I told her if I had to do it again I'd remove the back of the island then worry about fixing that, would be a much easier project.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
05-29-2019, 10:30 AM
|
#6
|
Senior Member
Join Date: Oct 2018
Location: Southern California
Posts: 1,286
|
I had a friend recommend long needle nose pliers with a slight curve at the end. He said it was the only way he could get to the faucet connections.
https://www.lowes.com/pd/IRWIN-VISE-...ers/1000236061
__________________
Mike
2017 F250 6.7 Powerstroke FX4 crew cab
2016 Hideout 24BHSWE (27 foot TT)
|
|
|
05-29-2019, 11:56 AM
|
#7
|
Senior Member
Join Date: May 2019
Location: Picton
Posts: 242
|
One things you could consider.
We had a sprayer, but never enough pressure to make good use of it.
Instead of a vegetable sprayer, put a residential faucet, but then use that 3rd hole for a Soap Dispenser. Worked wonders for us.
The bottle is screwed from underneath the counter - I woudl open a drawer and reach inside to refill it.
Just an idea.
__________________
****
2019 Cougar 315RLS
2011 Ford F250
May you live as long as you want, and never want as long as you live.
|
|
|
05-29-2019, 12:51 PM
|
#8
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Sometimes it's easier to pull the sink than install the faucet with 12" flex tubes and reinstall the sink.
Adjustable basin wrenches have also worked for years and tool companies claim their new-fangled FAUCET TOOLS will just about install it for you.
Just remember to wear the correct pants when you get under the sink so anyone watching will think you are a real plumber.
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
05-29-2019, 05:03 PM
|
#9
|
Senior Member
Join Date: Oct 2016
Location: Commerce Twp, Mi
Posts: 1,002
|
__________________
TOM
2011 Chevy Silverado
1500, HD Tow Package
2017 Keystone Hideout 177LHS Carlisle Radial HDs
:
|
|
|
05-30-2019, 02:14 AM
|
#10
|
Member
Join Date: Mar 2019
Location: Rochester
Posts: 48
|
It was a real tight squeeze..just cut the pex at the old faucet supply connection point and added sharkbite shutoffs
|
|
|
05-30-2019, 04:28 AM
|
#11
|
Senior Member
Join Date: Oct 2018
Location: Southern California
Posts: 1,286
|
Quote:
Originally Posted by Kylesmith3021
It was a real tight squeeze..just cut the pex at the old faucet supply connection point and added sharkbite shutoffs
|
That looks good. Good idea and good job.
__________________
Mike
2017 F250 6.7 Powerstroke FX4 crew cab
2016 Hideout 24BHSWE (27 foot TT)
|
|
|
05-30-2019, 04:31 PM
|
#12
|
Senior Member
Join Date: Mar 2018
Location: greensburg
Posts: 124
|
Wow,you had a lot more room under your sink then I did
|
|
|
06-02-2019, 07:21 AM
|
#13
|
Member
Join Date: Mar 2018
Location: Georgetown
Posts: 64
|
Quote:
Originally Posted by GeekSquadOfUn
One things you could consider.
Instead of a vegetable sprayer, put a residential faucet, but then use that 3rd hole for a Soap Dispenser. Worked wonders for us.
The bottle is screwed from underneath the counter - I woudl open a drawer and reach inside to refill it.
Just an idea.
|
All the soap dispensers I have seen, you pull the pump out from the top and pour down the hole to fill the bottle. Reinstall the pump.
__________________
2009 Passport 195RB, 2014 F150 SCAB
|
|
|
06-02-2019, 07:33 AM
|
#14
|
Senior Member
Join Date: May 2019
Location: Picton
Posts: 242
|
Correct - but I am a messy kinda guy and always overfill it - the wife gets upset...
So I simply unscrew and visually fill the bottle. Works too.
__________________
****
2019 Cougar 315RLS
2011 Ford F250
May you live as long as you want, and never want as long as you live.
|
|
|
06-05-2019, 06:03 AM
|
#16
|
Senior Member
Join Date: May 2018
Location: Markham, Ontario
Posts: 1,942
|
__________________
Dan & Serena
2019 GMC SIERRA 2500 HD SLE
2015 Cougar X-Lite 29 RET
|
|
|
06-05-2019, 09:51 AM
|
#17
|
Member
Join Date: Jul 2017
Location: Kingsport
Posts: 38
|
We basically did this same residential faucet; used pex pipe with sharkbites; and it was the best thing we ever did.
|
|
|
06-06-2019, 06:27 PM
|
#18
|
Junior Member
Join Date: Jun 2019
Location: LAKELAND
Posts: 8
|
We just changed out ours today... Yes there isn't much room but after some low grumbling and a few words that won't be mentioned we are happy with our new faucet.
|
|
|
06-07-2019, 02:23 AM
|
#19
|
Senior Member
Join Date: Dec 2018
Location: Northville, NY
Posts: 374
|
The nice thing about changing out those cheap plastic RV faucets is no matter how much contortion and grumbling it takes, when your done it's always very satisfying.
Ours actually had a nice residential kitchen faucet, but the bathroom one was flimsy and would squeak loudly no matter what I did. It's gone now.
|
|
|
06-12-2019, 02:33 AM
|
#20
|
Member
Join Date: Jun 2018
Location: Deux Montagnes,Quebec
Posts: 66
|
Nice , was thinking about that myself. Also do not like my plastic sink so might do both at the same time
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|