|
09-24-2018, 04:30 PM
|
#1
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
2007 keystone raptor toyhauler
Anyone own a 2007 Keystone Raptor. I need to know how to turn on the 5 inch round light on passenger side of trailer. There is one on the front top. One on the back rear and another on rear side driver side. Any help would be appreciated.
|
|
|
09-24-2018, 08:06 PM
|
#2
|
Senior Member
Join Date: Oct 2017
Location: Eagle Creek
Posts: 115
|
I have Raptor and mine comes on with two on the curb side.
__________________
2010 RAPTOR 361 LEV
2004 ARCTIC FOX 1150B TRUCK CAMPER
2008 FORD F450
2004 DCB W/TWIN MERCURY RACING 300X'S
|
|
|
09-24-2018, 10:21 PM
|
#3
|
Gone Traveling
Join Date: May 2018
Location: Elverta
Posts: 31
|
Is only one not coming on? Burned out bulb? All 3 of mine are on the same switch on the main control panel labeled "flood."
|
|
|
09-25-2018, 05:57 AM
|
#4
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
Flood or scare lights three of them
It's all three. New bulbs. Fuse is good. Switch is good. No power at sockets. I have a flood light switch. But no scare light switches that I can find. Any help would be appreciated.
|
|
|
09-25-2018, 06:09 AM
|
#5
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,013
|
2007 keystone raptor toyhauler
You said switch is good.. does that mean you have DC power into the switch and out of the switch. If so then time to trace that the power past the switch to wherever it breaks off at with a meter
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
09-25-2018, 06:36 AM
|
#6
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
I called the guy I bought it off of. He said all 3 lights worked but he didn't remember how he turned them on. I do have a flood light switch that turns nothing on so didn't know if all three would be on same circuit.
|
|
|
09-25-2018, 09:34 AM
|
#7
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
No power to any of the three lights. So, this tells me I am missing a switch some where right. I have power at switch in and out. Power at the fuse. When I turn the flood light switch on none of the three lights come on. If I had a short in wiring in wall it should trip the fuse correct.
|
|
|
09-25-2018, 02:35 PM
|
#8
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Do you have a remote control? If so, have you tried using it to turn on the lights?
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
09-25-2018, 02:47 PM
|
#9
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
They tell me if there toggle switches there is no remote. Is that true. We do not have a remote with the unit. There not push buttons.
|
|
|
09-25-2018, 03:08 PM
|
#10
|
Member
Join Date: Jul 2015
Location: Tucson, AZ
Posts: 33
|
Check for a flood light switch in the garage by where you lower the beds.
|
|
|
09-25-2018, 03:41 PM
|
#11
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
In the garage that switch works the two large white work lights above the toy hauler big door. The flood light on our main panel beside entrance door has power but nothing comes on.
|
|
|
09-25-2018, 04:12 PM
|
#12
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
Ours have two switches in garage one works the two big lights above the loading door. The other one works two big lights inside the garage. I have a flood light switch at main panel. There is power to it and to the fuse but it doesn't turn anything on. Don't even know if all three lights are on the same circuit that are not coming on. Any information is appreciated.
|
|
|
09-25-2018, 04:23 PM
|
#13
|
Gone Traveling
Join Date: May 2018
Location: Elverta
Posts: 31
|
Quote:
Originally Posted by Kristyleiser2007
Ours have two switches in garage one works the two big lights above the loading door. The other one works two big lights inside the garage. I have a flood light switch at main panel. There is power to it and to the fuse but it doesn't turn anything on. Don't even know if all three lights are on the same circuit that are not coming on. Any information is appreciated.
|
You're at the right place. I have a 2004 and just rebuilt my panel. The wiring behind it is a huge mess and doesn't make any sense. Both of my interior and flood light circuits use identical color coded wires; a white, and a white with red stripe. But both circuits are wired differently. One uses the striped wire as hot, the other uses the pure white as hot. If someone has been behind this panel recently, it wouldn't be hard to screw this up.
|
|
|
09-26-2018, 06:01 AM
|
#14
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
Thank you we are checking
|
|
|
09-30-2018, 06:42 AM
|
#15
|
Junior Member
Join Date: Sep 2018
Location: Wooster
Posts: 11
|
We found the problem. We took the ceiling down in bedroom, by the first outside light. When someone put a new antenna on, they drilled thru the wiring. We rewired it, all three lights came on with the one switch. Just got the ceiling all back up, I am loving those lights. Thanks everyone for trying to help.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 03:17 AM.