Quote:
Originally Posted by Fit4Infinity
I found the PDI and have a question. My unit is the Western Edition which includes a sealed under carriage and heated tanks. How do I PDI the sealed undercarriage, seals, pipes ducts, tanks yada yada?
.
|
You can always remove a few of the self-taping screws securing the black Coroplast, pull down the Coroplast and, using a flashlight, have a peek inside the underbelly. To get a complete overall picture of things, you may have to do small sections at a time. I wouldn't recommend removing an entire section.
While having a peek, make a note of where things are located --- the tanks, valves, etc. - --- in case you have plumbing issues with valves, tanks and ductwork sometime in the future.
Check to see how well it is insulated. It may have chunks of insulation thrown in helter-skelter justifying the term "insulated underbelly".
Good luck with your PDI and TAKE YOUR TIME.