Dinette table top

[skip]

I have a 2011 Passport 2510RB and I left the roof vent open during a rainstorm, now my dinette Table top is delaminating. Has anyone here replaced their table top by building an new one? What material would you use? I have some 3/4" treated plywood....

[JRTJH]

3/4 inch "Treated" plywood may be overkill. I'd be concerned with the chemicals present in any "Treated" wood that close to food, especially with children's grubby hands all over the bottom of the table during meals.....

One alternative is to go to Lowe's or HD and check their tabletop blanks. Glued together pine strips, fairly light and easily stained and varnished to match the interior of your RV. truthfully, by the time you buy laminate to glue on top of the plywood, it's probably cheaper to buy a blank and finish it yourself.

[Terrydactile]

I replaced one in our previous trailer. I used 3/4" cabinet grade plywood with birch venier. I finished the edges with pre made edging that has glue on the back. The glue is heat activated so you use an iron to put it on with. It trurned out really nice.

[skip]

Thanks. Good suggestions.

[Scottinvt]

I would go to a cabinet / counter shop and have a new one made. We have a shop here in town and they are very reasonable !!

[The Sod Father]

You may also want to price out the cost of the excellent suggestions below with what it would cost for a replacement from Keystone. It's worth a shot and doesn't really cost you anything to shop.