|
04-06-2018, 03:58 AM
|
#1
|
Junior Member
Join Date: Aug 2016
Location: Yorktown
Posts: 16
|
Incommand - disable password.
Our first trip in our new trailer and something as simple as turning on a specific light, I have to go to the command center, enter password, then select interior lights, which turns on all inside lights.
Does anyone know how to disable the required password each time you need to operate the command center?
I know it's probably a safety feature for the slides and what not, and if that's the case, Jensen should have allowed lights and whatnot, not require a password and if you hit a slide button, prompt for a password.
I know I can turn interior lights on at the command center and then turn each light off at each light. If I can't disable the password, that's probably what I'll do.
|
|
|
04-06-2018, 07:02 AM
|
#2
|
Senior Member
Join Date: Jun 2014
Location: Kamiah
Posts: 276
|
I don't think you can disable the password completely. You can adjust the ( 0-30 minutes)timeout function. It is in the setting. Menu>settings>passcode>set passcode timer. Hope this helps.
__________________
Ron&Sue
2017 Montana 3720RL Legacy
14' Ram 3500 DRW
|
|
|
04-06-2018, 09:05 AM
|
#3
|
Junior Member
Join Date: Aug 2016
Location: Yorktown
Posts: 16
|
Quote:
Originally Posted by fatcatzzz
I don't think you can disable the password completely. You can adjust the ( 0-30 minutes)timeout function. It is in the setting. Menu>settings>passcode>set passcode timer. Hope this helps.
|
Thank you much! That should help some!
|
|
|
04-06-2018, 02:57 PM
|
#4
|
Senior Member
Join Date: Apr 2017
Location: Lanexa
Posts: 260
|
Our unit has 5 buttons at the bottom of the display (water pump, water heater, interior lights, exterior lights, and security lights), that can be turned on and off without entering the passcode. Those functions work as soon as you turn the panel on. Not sure if that is an option programmed in but I know you can adjust the 'floorplan' (dont ask how I know) in the options area. I have heard generally good things about the support team at on these keypads if it comes to that.
__________________
Kevin -n- Lisa
17 Fuzion 325 / 15 Chevy 3500 HC DRW
06 HD Ultra Classic
|
|
|
04-06-2018, 04:39 PM
|
#5
|
Junior Member
Join Date: Aug 2016
Location: Yorktown
Posts: 16
|
Quote:
Originally Posted by K_N_L
Our unit has 5 buttons at the bottom of the display (water pump, water heater, interior lights, exterior lights, and security lights), that can be turned on and off without entering the passcode. Those functions work as soon as you turn the panel on. Not sure if that is an option programmed in but I know you can adjust the 'floorplan' (dont ask how I know) in the options area. I have heard generally good things about the support team at on these keypads if it comes to that.
|
Thanks for that info!. Mine only shows a place to enter a password, but I will play with it to see if I can get mine set the same as yours.
|
|
|
04-06-2018, 06:38 PM
|
#6
|
Member
Join Date: Oct 2016
Location: Acton, Ca.
Posts: 46
|
Can not remember off the top of my head how to do it but yes the passcode can be disabled however the in command function on your phone cannot
|
|
|
04-06-2018, 07:00 PM
|
#7
|
Member
Join Date: Feb 2017
Location: Climax
Posts: 85
|
Yes you can disable the passcode. But i cant remember how to do it. Let me get in my camper and remember how i did it.
|
|
|
04-06-2018, 07:07 PM
|
#8
|
Junior Member
Join Date: Feb 2018
Location: Yukon
Posts: 17
|
I would love to know
|
|
|
04-06-2018, 07:10 PM
|
#9
|
Member
Join Date: Feb 2017
Location: Climax
Posts: 85
|
Ok
Menu passcode change passcode then disable
|
|
|
04-06-2018, 07:39 PM
|
#10
|
Senior Member
Join Date: Jun 2017
Location: El Paso
Posts: 155
|
I have the In Command in my 2017 Alpine. I don't log off per say. I simply push the off button but not necessarily log out. I'm able to press on but and instantly turn on / off lights without having to enter password over and over
__________________
2021 F350 Lariat Ultimate Pkg,FX4,CC,LB
2017 Alpine 3660FL
|
|
|
04-06-2018, 07:48 PM
|
#11
|
Senior Member
Join Date: Jun 2017
Location: El Paso
Posts: 155
|
Quote:
Originally Posted by Tomurphjr
Our first trip in our new trailer and something as simple as turning on a specific light, I have to go to the command center, enter password, then select interior lights, which turns on all inside lights.
Does anyone know how to disable the required password each time you need to operate the command center?
I know it's probably a safety feature for the slides and what not, and if that's the case, Jensen should have allowed lights and whatnot, not require a password and if you hit a slide button, prompt for a password.
I know I can turn interior lights on at the command center and then turn each light off at each light. If I can't disable the password, that's probably what I'll do.
|
I have a 2017 Alpine with the In Command. After initial log in I don't log off or turn off completely. Now I'm able to simply walk in press the on button and screen comes on without re-enteting password. Makes it much easier and faster.
|
|
|
04-07-2018, 03:30 AM
|
#12
|
Senior Member
Join Date: Jun 2014
Location: Kamiah
Posts: 276
|
Quote:
Originally Posted by brad2388
Ok
Menu passcode change passcode then disable
|
Yep, worked like a charm. Guess you can teach an old dog a new trick! lol
__________________
Ron&Sue
2017 Montana 3720RL Legacy
14' Ram 3500 DRW
|
|
|
04-07-2018, 03:39 AM
|
#13
|
Senior Member
Join Date: Aug 2017
Location: Lafayette
Posts: 1,068
|
I think I'll be trying that on mine also!
__________________
2015 Ram,3500,Dually,B&W,4.10s,Aisin,Limited,Silver
2018 Raptor,428SP w/full body paint
2012 Harley, Ultra Limited
|
|
|
04-07-2018, 11:16 AM
|
#14
|
Junior Member
Join Date: Aug 2016
Location: Yorktown
Posts: 16
|
Quote:
Originally Posted by brad2388
Ok
Menu passcode change passcode then disable
|
Perfect! Worked like a charm! Thank you.
|
|
|
04-07-2018, 11:17 AM
|
#15
|
Member
Join Date: Feb 2017
Location: Climax
Posts: 85
|
Good to hear!
|
|
|
04-08-2018, 07:33 AM
|
#16
|
Junior Member
Join Date: Feb 2018
Location: Yukon
Posts: 17
|
Thank you Brad... it worked!! No more password.
|
|
|
04-10-2018, 04:56 PM
|
#17
|
Member
Join Date: Feb 2017
Location: Climax
Posts: 85
|
Quote:
Originally Posted by SJH
Thank you Brad... it worked!! No more password.
|
Np glad it worked!
|
|
|
04-10-2018, 06:46 PM
|
#18
|
Member
Join Date: Jan 2018
Location: Southern Oregon
Posts: 32
|
Thanks for the directions. Worked perfectly on a 2017 Fuzion.
|
|
|
04-11-2018, 12:21 PM
|
#19
|
Member
Join Date: Nov 2016
Location: Livingston
Posts: 92
|
I too disabled the password on the display. Now I wish I could do the same to the phone app.
__________________
2017 Alpine 3301GR
2019 Ram 3500
|
|
|
04-13-2020, 03:19 PM
|
#20
|
Senior Member
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,314
|
I know this is an antique thread, but people might look here for answers, and I suspect the software has changed since...
On my model (2019 NCSP35), there is an entry to disable the main screen passcode, but then it immediately reboots and demands you establish a new passcode. What does work is setting the passcode timer to never, then you only have to enter it once and it stays unlocked.
I know of no way to disable the (unrelated) passcode for the smartphone app.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|