Manual Slide Operation
Have a 2018 Passport 2920BH with one cable operated slide that includes the dinette and small sofa. I did not get a good answer from the dealer on how to manually operate and I figured I’d just read through the manuals. Unfortunately the manuals direct you to the underside of the TT to look for the shaft or an access hole in the frame. Before I started poking around the corroplast I looked inside over the slide out to find the motor was mounted on the wall above the slide. My question is how do you get a wrench or cordless tool on the motor? It appears that there is a small access cover at the inside/top of the slide but when the slide is in you can’t reach the motor. Any suggestions? This group is very helpful and I thank you in advance of any suggestions.
|