deinett problem

[wayne4e]

just got back from three day trip. tried to use the dinette for bed guess what layed down to sleep and the table broke[i weigh 199lbs]today i was unloading so i took all the cushions off and laid the table down and guess what the rear bench is 3/4 of an inch off from side to side do not buy the large dinette very very cheap

[Bowline]

Hi Wayne4e,

After a couple of trips, one of the bench seats in the dinette in my Cougar 27RLS was coming loose where it attaches to the floor. I'm sure that if I lowered the table to make a bed, it would have slipped out on one side. Since my unit was under warranty, my dealer fixed it. No troubles since. Hopefully, your dealer will be able to help you.

[MightyMike]

Originally Posted by wayne4e

just got back from three day trip. tried to use the dinette for bed guess what layed down to sleep and the table broke[i weigh 199lbs]today i was unloading so i took all the cushions off and laid the table down and guess what the rear bench is 3/4 of an inch off from side to side do not buy the large dinette very very cheap

Same thing just happened to ours. Granddaughter was having an "adjustment nite", and when her mom went to lay down with her (all of 110 pounds!) table slipped of the front brace and broke the cheap particle board, Cracked the table top formica too! Suggest anyone that intends to use these as sleep areas (what they are supposed to be designed for) put the table down before you leave and make sure it can't slide off of the little plastic blocks they use to support it.