|
09-24-2018, 05:32 PM
|
#1
|
Junior Member
Join Date: Sep 2018
Location: Valrico
Posts: 22
|
Dometic Thermostat issue
We just bought a new Cougar 34 Tsb and the digital Thermostat Sucks! Anyone have issues with the digital thermostat? If so which one did you switch too?
|
|
|
09-24-2018, 07:31 PM
|
#2
|
Senior Member
Join Date: May 2015
Location: Rockett, TX
Posts: 481
|
Had to reset ours almost immediately after we got the trailer, no problems since then. Sorry I don't remember which buttons to push at the same time to accomplish the reset, check the thermostat's manual for instructions.
__________________
Jerry & Debbie
with Fur Babies Sasha & Sam
2018 Alpine 3401RS
2019 Ford F350 SRW
|
|
|
09-25-2018, 01:21 AM
|
#3
|
Senior Member
Join Date: Oct 2016
Location: Macedonia
Posts: 217
|
You're correct - the digital thermostat is very quirky, and I periodically see it resetting the temperature to 90 degrees all by itself. It definitely takes some getting used to how much/little pressure to apply to the touch pad. It's on my list to replace in next Spring.
__________________
DocP (Michael)
Former: Keystone Cougar 32RLI and 34TBS
Current: 2019 Georgetown GT5 31L5 motorhome
|
|
|
09-25-2018, 04:12 PM
|
#4
|
Senior Member
Join Date: Apr 2009
Location: Oregon Coast
Posts: 259
|
Just my Dometic thermostat new face plates . Mine did not want to work sometimes. Got ahold of Dometic and they sent me 2 new ones at no cost.
__________________
2018 Montana HC 330RL
|
|
|
09-25-2018, 04:15 PM
|
#5
|
Member
Join Date: Nov 2017
Location: Burtonsvlle
Posts: 83
|
I have the dometic one and it goes to 90 by itself. Bought a Honeywell I will be switching to soon. The dometic thermostat stinks in my opinion.
|
|
|
12-09-2018, 08:24 AM
|
#6
|
Junior Member
Join Date: Jul 2018
Location: Lompoc
Posts: 6
|
Touch thermostat
I have a 2019 Bullet, the only way I can make mine work is by taking the cover off and touching the contacts! Going back to the dealer again this week because now we have a clicking sound out of the AC when the furnace is running. The pattern is becoming clear now after our 3rd outing - Camp, take to dealer, put away.
|
|
|
12-09-2018, 04:29 PM
|
#7
|
Gone Traveling
Join Date: Jun 2018
Location: Frostbite Falls
Posts: 325
|
Mine goes back & forth F to C, sometimes I push the button & it does nothing.
|
|
|
12-11-2018, 04:43 PM
|
#8
|
Junior Member
Join Date: Sep 2018
Location: Valrico
Posts: 22
|
dometic sent us a new one and it works perfect!
|
|
|
12-11-2018, 07:44 PM
|
#9
|
Site Team | Emeritus
Join Date: Jan 2014
Location: Western PA
Posts: 2,732
|
Good, glad to hear you got it resolved and got back to us
Thanks
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)
|
|
|
01-01-2019, 06:04 PM
|
#10
|
Junior Member
Join Date: Jan 2019
Location: Wilsonville
Posts: 1
|
I've found that high humidity inside the camper is usually when mine acts up.
|
|
|
01-03-2019, 01:47 PM
|
#11
|
Member
Join Date: Sep 2014
Location: Colorado Springs, CO
Posts: 35
|
I have the Domestic ten button two zone model and it has taken me awhile to figure out why the programed scheduled zones don't work the way I program them and schedule the furnace to come on like I want in the morning. Found out if I actually SET THE CLOCK on the controller it actually works great. I have also found that if I lose power to the RV, and my battery isn't connected, the clock will zero out and the clock will need to be reset again once I have power back on the rig. I guess it's just been a learning experience with all these buttons to push.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 05:28 AM.